REAR CENTER SEAT OUTER BELT ASSEMBLY (for 60/40 Split Double-folding Seat Type RH Side) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. REMOVE REAR SEAT ASSEMBLY RH


    1. Remove the rear No. 1 seat assembly RH Click here.

  2. REMOVE NO. 1 SEATBACK BOARD SUB-ASSEMBLY

    A01DN9A

    1. Using a clip remover, detach the 3 clips.

    2. Detach the guide and remove the board.

  3. REMOVE REAR SEAT INNER RECLINING COVER RH

    A01DSOJ

    1. Remove the screw.

    2. Detach the 2 guides and remove the cover.

  4. REMOVE REAR CENTER SEAT INNER BELT ASSEMBLY

    A01DS01E02
    Text in Illustration
    *1 Band

    1. Detach the fastening tape and remove the band.

    2. Remove the bolt and inner belt.

  5. REMOVE CENTER SEATBACK COVER SUB-ASSEMBLY

    A01DO7G

    1. Remove the screw.

    2. Detach the 2 guides and remove the cover.

  6. REMOVE CENTER SEATBACK ASSEMBLY

    A01DTER

    1. Using a T45 "TORX" socket wrench, remove the "TORX" bolt and bush.

    2. Remove the 2 bolts and center seatback.

  7. REMOVE CENTER NO. 2 SEATBACK COVER

    A01DTY0

    1. Remove the screw.

    2. Detach the 2 claws and remove the cover.

  8. REMOVE REAR SEATBACK LOCK COVER RH

    A01DQIH

    1. Remove the 2 screws.

    2. Detach the 2 guides and remove the cover.

  9. REMOVE REAR SEATBACK LOCK ASSEMBLY RH


    1. A01DNHE

      Remove the 2 hog rings.

    2. A01DST6

      Remove the 2 bolts.

    3. While moving the release button in the direction of the arrow in the illustration, detach it from the grommet and remove the seatback lock.

  10. REMOVE REAR SEATBACK STOP BUTTON GROMMET

    A01DQ72

    1. Detach the 3 claws and remove the grommet.

  11. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

    A01DMXE

    1. Detach the 4 claws and remove the 2 supports.

  12. REMOVE SEAT BELT ANCHOR COVER CAP

    A01DU8SE01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 claws and 2 guides, and then remove the cap.

      Tech Tips

      Tape the screwdriver tip before use.

  13. REMOVE REAR SEAT SHOULDER BELT COVER

    A01DQX4

    1. Remove the screw.

    2. Detach the 3 claws and remove the cover.

    3. Disconnect the outer belt from the cover.

  14. REMOVE REAR SEATBACK LOCK STRIKER PROTECTOR

    A01DLW0

    1. Remove the protector from the striker.

  15. REMOVE REAR SEAT LOCK STRIKER

    A01DMZR

    1. Using a T45 "TORX" socket wrench, remove the striker.

  16. REMOVE SEATBACK COVER WITH PAD

    A01DU8XE01
    Text in Illustration
    *1 Hook
    *2 Hog Ring

    1. Remove the hog rings, detach the hook, and then remove the seatback cover with pad.

    2. Disconnect the outer belt from the seatback cover with pad.

  17. REMOVE REAR SEATBACK EDGE PROTECTOR


    1. Remove the protector from the seatback frame.

  18. REMOVE REAR SEAT SHOULDER BELT GUIDE

    A01DRTX

    1. Detach the claw and guide, and then remove the belt guide.

  19. REMOVE NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY RH

    A01DUQT

    1. Remove the nut and bolt, and then detach the 2 claws and remove the seat belt.