Click here

REAR NO. 2 SEAT OUTER BELT ASSEMBLY REMOVAL

Click here
Click here Click here
Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

Click here
  1. Click here

    REMOVE REAR NO. 2 SEAT ASSEMBLY LH


    1. for Manual Seat Type:

      Remove the rear No. 2 seat assembly LH (Click here).

    2. for Power Seat Type:

      Remove the rear No. 2 seat assembly LH (Click here).

  2. Click here

    REMOVE REAR NO. 1 FLOOR STEP COVER

    Tip:

    Use the same procedure for all rear No. 1 floor step covers.


    1. Using a screwdriver, detach the 2 claws and remove the rear No. 1 floor step cover.

      Tip:

      Tape the screwdriver tip before use.

      Table 1. Text in Illustration
      *1 Protective Tape
  3. Click here

    REMOVE QUARTER SCUFF PLATE LH


    1. Remove the 2 bolts and quarter scuff plate.

  4. Click here

    REMOVE REAR DOOR SCUFF PLATE LH


    1. Put protective tape around the door scuff plate.

    2. Using a screwdriver, detach the 4 clips, 10 claws and 2 guides and remove the door scuff plate.

      Tip:

      Tape the screwdriver tip before use.

      Table 2. Text in Illustration
      *1 Protective Tape
  5. Click here

    REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH


    1. Partially remove the rear door opening trim weatherstrip so that the front quarter trim panel assembly LH and deck trim side panel assembly LH can be removed (Click here).

  6. Click here

    REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)


    1. Remove the 3 bolts and floor side rail.

  7. Click here

    REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)

    Tip:

    Use the same procedure described for the LH side.

  8. Click here

    REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

    Tip:

    Use the same procedure for the other rear No. 1 seat outer lap belt anchor cover.


    1. Detach the 3 claws and remove the rear No. 1 seat outer lap belt anchor cover.

  9. Click here

    REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Tip:

    Use the same procedure for the other No. 1 luggage compartment trim hook.


    1. Remove the luggage compartment trim hook by turning it clockwise.

  10. Click here

    REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

    Tip:

    Use the same procedure for the other No. 1 tonneau cover holder cap.


    1. Using a screwdriver, detach the 2 claws and remove the No. 1 tonneau cover holder cap.

      Tip:

      Tape the screwdriver tip before use.

      Table 3. Text in Illustration
      *1 Protective Tape
  11. Click here

    REMOVE FRONT DECK SIDE TRIM COVER LH (w/ Tonneau Cover)

    Tip:

    Use the same procedure for the other front deck side trim cover.


    1. Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.

      Tip:

      Tape the screwdriver tip before use.

      Table 4. Text in Illustration
      *1 Protective Tape
  12. Click here

    REMOVE ASSIST GRIP PLUG

    Tip:

    Use the same procedure for all assist grip plugs.


    1. Using a screwdriver, detach the 2 claws and remove the assist grip plug.

      Tip:

      Tape the screwdriver tip before use.

      Table 5. Text in Illustration
      *1 Protective Tape
  13. Click here

    REMOVE ASSIST GRIP SUB-ASSEMBLY

    Tip:

    Use the same procedure for the other assist grip.


    1. Remove the 2 bolts and assist grip.

  14. Click here

    REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    1. A01DSFL

      Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

    2. A01DU7V

      Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.

    3. A01DNB2

      for RH Side:

      Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.

    4. A01DQR3

      Detach the 4 clips and 8 claws and remove the deck trim side panel.

  15. Click here

    REMOVE REAR QUARTER TRIM PANEL ASSEMBLY LH

    Tip:

    Use the same procedure described for the LH side.

  16. Click here

    REMOVE REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH


    1. A01DPP5

      Remove the bolt and rear No. 1 seat outer belt shoulder anchor.

    2. A01DTHQ

      Remove the bolt and rear No. 2 seat outer belt assembly.

  17. Click here

    REMOVE REAR SEAT OUTER BELT ANCHOR PLATE SUB-ASSEMBLY LH


    1. Remove the bolt and anchor plate.

  18. Click here

    REMOVE SEAT BELT ANCHOR PLATE ASSEMBLY (for RH Side)


    1. Remove the 2 bolts and anchor plate.