REAR NO. 2 SEAT INNER BELT ASSEMBLY INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY LH


    1. Using a T45 "TORX" socket wrench, install the inner belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  2. INSTALL REAR SEAT LOWER CUSHION HINGE COVER RH


    1. Attach the guide and 2 claws to install the cover.

    2. Install the 2 screws.

  3. INSTALL REAR NO. 2 SEAT ASSEMBLY LH


    1. for Manual Seat Type Seat LH Side:

      Install the rear No. 2 seat assembly LH Click here.

    2. for Power Seat Type Seat LH Side:

      Install the rear No. 2 seat assembly LH Click here.