Click here

REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type RH Side) INSTALLATION

Click here
Click here Click here
CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart (Click here).

Click here
  1. Click here

    INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH


    1. Install the inner belt with the bolt.

      42 N*m 428 kgf*cm 31 ft.*lbf
      Note:

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

      Table 1. Text in Illustration
      *a Protruding Part
  2. Click here

    INSTALL REAR SEAT CUSHION MOULDING RH


    1. Attach the 2 guides and 3 claws to install the rear seat rear cushion moulding LH.

    2. Install the screw.

  3. Click here

    INSTALL REAR SEAT ASSEMBLY RH


    1. Install the rear seat assembly RH (Click here).