REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type RH Side) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE REAR SEAT ASSEMBLY RH


    1. Remove the rear seat assembly RH Click here.

  2. REMOVE REAR SEAT CUSHION MOULDING RH

    A01DNG0

    1. Remove the screw.

    2. Using a moulding remover, detach the 3 claws.

    3. Detach the 2 guides and remove the rear seat rear cushion moulding LH.

  3. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

    A01DSHVE01

    1. Remove the bolt and inner belt.