REAR SEAT CUSHION HEATER (for 60/40 Split Slide Walk-in Seat Type RH Side) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY RH

    Click here

  2. REMOVE REAR SEAT UPPER RECLINING COVER RH

    A01DRVJE01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 3 claws and remove the rear seat upper reclining cover RH.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

    A01DSP0

    1. Remove the 3 screws and reclining adjuster release handle RH.

  4. REMOVE REAR SEAT CUSHION MOULDING RH

    A01DMYQ

    1. Using a clip remover, detach the clip.

    2. Using a moulding remover, detach the 3 claws.

    3. Move the rear seat cushion moulding RH in the direction of the arrow to detach the guide and remove the rear seat cushion moulding RH.

  5. REMOVE REAR SEAT REAR CUSHION MOULDING LH

    A01DNG0

    1. Remove the screw.

    2. Using a moulding remover, detach the 3 claws.

    3. Detach the 2 guides and remove the rear seat rear cushion moulding LH.

  6. REMOVE SEAT CUSHION COVER WITH PAD


    1. A01DTDP

      w/ Seat Heater System:


      1. Disconnect the 2 rear seat heater connectors.

      2. A01DRLA

        Pull out the wire harness as shown in the illustration.

    2. A01DO6L

      Detach the hooks and remove the seat cushion cover with pad.

  7. REMOVE REAR NO. 2 SEAT PROTECTOR

    A01DUA9

    1. Remove the 2 rear No. 2 seat protectors from the separate type rear seat cushion pad.

  8. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER

    A01DQJG

    1. Remove the 14 hog rings and separate type rear seat cushion cover from the separate type rear seat cushion pad.

  9. REMOVE REAR SEAT CUSHION HEATER ASSEMBLY

    A01DNBJE01
    Text in Illustration
    *1 Tack Pin

    1. Cut off the 23 tack pins and remove the rear seat cushion heater assembly from the separate type rear seat cushion cover.