REAR SEAT CUSHION HEATER (for 60/40 Split Slide Walk-in Seat Type LH Side) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. INSTALL REAR SEAT CUSHION HEATER ASSEMBLY

    A01DSX2E02
    Text in Illustration
    *1 Tack Pin
    *2 Name Stamp

    1. Set the rear seat cushion heater assembly in place with the name stamp side facing the separate type rear seat cushion cover.

    2. Install the rear seat cushion heater assembly with 23 new tack pins.

  2. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER


    1. Set the separate type rear seat cushion cover in place.

    2. A01DUBXE01
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, install the separate type rear seat cushion cover to the separate type rear seat cushion pad with 14 new hog rings.

      Note


      • Be careful not to damage the separate type rear seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seat cushion cover.

  3. INSTALL REAR NO. 2 SEAT PROTECTOR


    1. Install the 2 rear No. 2 seat protectors to the separate type rear seat cushion pad.

  4. INSTALL SEAT CUSHION COVER WITH PAD


    1. A01DQIT

      Attach the hook.

    2. A01DOAD

      Attach the hooks to install the seat cushion cover with pad.

    3. w/ Seat Heater System:


      1. A01DR50

        Pass the wire harness as shown in the illustration.

      2. A01DSJ3

        Connect the 2 rear seat heater connectors.

  5. INSTALL REAR SEAT CUSHION MOULDING LH

    A01DRMT

    1. Move the rear seat cushion moulding LH in the direction of the arrow to attach the guide.

    2. Attach the 3 claws and clip to install the rear seat cushion moulding LH.

  6. INSTALL CENTER SEAT HINGE COVER LH

    A01DSIS

    1. Attach the 2 guides and install the center seat hinge cover LH with the clip.

  7. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH


    1. Install the reclining adjuster release handle LH with the 3 screws.

  8. INSTALL REAR SEAT UPPER RECLINING COVER LH

    A01DP0Y

    1. Attach the 3 claws to install the rear seat upper reclining cover LH.

  9. INSTALL REAR NO. 1 SEAT ASSEMBLY LH

    Click here