REAR SEAT CUSHION HEATER (for 60/40 Split Slide Walk-in Seat Type LH Side) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY LH

    Click here

  2. REMOVE REAR SEAT UPPER RECLINING COVER LH

    A01DSVIE01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 3 claws and remove the rear seat upper reclining cover LH.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

    A01DMH2

    1. Remove the 3 screws and reclining adjuster release handle LH.

  4. REMOVE CENTER SEAT HINGE COVER LH

    A01DLY4

    1. Using a clip remover, remove the clip.

    2. Detach the 2 guides and remove the center seat hinge cover LH.

  5. REMOVE REAR SEAT CUSHION MOULDING LH

    A01DR94

    1. Using a clip remover, detach the clip.

    2. Using a moulding remover, detach the 3 claws.

    3. Move the rear seat cushion moulding LH in the direction of the arrow to detach the guide and remove the rear seat cushion moulding LH.

  6. REMOVE SEAT CUSHION COVER WITH PAD


    1. A01DSJ3

      w/ Seat Heater System:


      1. Disconnect the 2 rear seat heater connectors.

      2. A01DR50

        Pull out the wire harness as shown in the illustration.

    2. A01DSOO

      Detach the hooks.

    3. A01DO80

      Detach the hook and remove the seat cushion cover with pad.

  7. REMOVE REAR NO. 2 SEAT PROTECTOR

    A01DQ7D

    1. Remove the 2 rear No. 2 seat protectors from the separate type rear seat cushion pad.

  8. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER

    A01DNDY

    1. Remove the 14 hog rings and separate type rear seat cushion cover from the separate type rear seat cushion pad.

  9. REMOVE REAR SEAT CUSHION HEATER ASSEMBLY

    A01DSX2E01
    Text in Illustration
    *1 Tack Pin

    1. Cut off the 23 tack pins and remove the rear seat cushion heater assembly from the separate type rear seat cushion cover.