SEAT HEATER SWITCH (for Front Seat) REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A01DQRN

      Detach the 4 clips.

    2. Disconnect the connector and remove the integration control and panel assembly.

  2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    A01DNL5

    1. Detach the 5 clips and remove the No. 2 instrument panel finish panel cushion.

  3. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION

    Tech Tips

    Use the same procedure described for the No. 2 instrument panel finish panel cushion.

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    A01DT7H

    1. Detach the 4 clips and remove the instrument panel finish panel end LH.

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    A01DPKP

    1. Detach the 4 clips and remove the instrument panel finish panel end RH.

  6. REMOVE FRONT CONSOLE UPPER PANEL GARNISH


    1. w/o Seat Heater System:


      1. A01DULFE01
        Text in Illustration
        *1 Protective Tape

        Put protective tape around the front console upper panel garnish.

      2. Detach the 5 clips and remove the front console upper panel garnish.

      3. Disconnect the connector.

    2. w/o CRAWL:


      1. A01DOBAE01
        Text in Illustration
        *1 Protective Tape

        Put protective tape around the front console upper panel garnish.

      2. Detach the 5 clips and remove the front console upper panel garnish.

      3. Disconnect each connector.

    3. w/ CRAWL:


      1. A01DPSBE01
        Text in Illustration
        *1 Protective Tape

        Put protective tape around the front console upper panel garnish.

      2. Detach the 5 clips and remove the front console upper panel garnish.

  7. REMOVE SEAT HEATER SWITCH (for Manual Transmission)


    1. A01DP5V

      Detach the 4 claws and remove the 2 switches.

  8. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)

    A01DNBAE01
    Text in Illustration
    *1 Shifting Hole Cover

    1. Move the shifting hole cover downward.

    2. Twist the shift lever knob in the direction indicated by the arrow and remove it.

  9. REMOVE CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)

    A01DOXDE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the console panel.

    2. Using a moulding remover, detach the 8 clips and 2 claws.

    3. Disconnect each connector and remove the console panel.

  10. REMOVE SEAT HEATER SWITCH (for Automatic Transmission)


    1. A01DQMZ

      Disconnect the 2 connectors.

    2. A01DQ7R

      Detach the 4 claws and remove the 2 switches.