LUMBAR SWITCH (for Power Seat) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL LUMBAR SWITCH ASSEMBLY

    A01DM9Q

    1. Connect the lumbar switch connector.

    2. Attach the 2 claws to install the lumbar switch.

  2. INSTALL FRONT POWER SEAT SWITCH LH


    1. w/ Seat Memory System:

      Connect the 2 power seat switch connectors.

    2. w/o Seat Memory System:

      Connect the power seat switch connector.

    3. Install the front power seat switch LH with 3 screws.

  3. INSTALL FRONT SEAT CUSHION SHIELD LH


    1. Attach the 3 wire harness clamps and connect the seat wire connector.

    2. Attach the 3 claws to close the wire harness cover.

    3. Remove the clip attached to the separate type front seat cushion spring assembly and install it to the front seat cushion shield LH.

      A01DNYZ

    4. Attach the 2 clips, 3 claws and guide.

    5. Attach the guide of the front seat No. 1 inner cushion shield LH and install the screw.

    6. Connect the lifter motor connector.

  4. INSTALL RECLINING POWER SEAT SWITCH KNOB


    1. A01DNB3

      Attach the 2 claws to install the reclining power seat switch knob.

  5. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    A01DPML

    1. Attach the 2 claws to install the slide and vertical power seat switch knob.

  6. INSTALL FRONT SEAT ASSEMBLY


    1. Install the front seat assembly Click here.