LUMBAR SWITCH (for Power Seat) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE FRONT SEAT ASSEMBLY


    1. Remove the front seat assembly Click here.

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    A01DUEA

    1. Using a moulding remover, detach the 2 claws and remove the slide and vertical power seat switch knob.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB

    A01DQE1

    1. Using a moulding remover, detach the 2 claws and remove the reclining power seat switch knob.

  4. REMOVE FRONT SEAT CUSHION SHIELD LH


    1. Disconnect the lifter motor connector.

    2. Remove the screw of the front seat No. 1 inner cushion shield LH and detach the guide.

    3. Detach the clip of the front seat No. 1 inner cushion shield LH.

    4. Using a moulding remover, detach the 3 claws and guide.

    5. Move the front seat cushion shield LH in the direction of the arrow to detach the clip and remove the front seat No. 1 inner cushion shield LH together with the front seat cushion shield LH as a unit.

      A01DP9D
    6. A01DMEL

      Detach the 3 claws and open the wire harness cover.

    7. Detach the 3 wire harness clamps and disconnect the seat wire connector.

  5. REMOVE FRONT POWER SEAT SWITCH LH


    1. Remove the 3 screws.

    2. A01DRFY

      w/ Seat Memory System:

      Disconnect the 2 power seat switch connectors and remove the front power seat switch LH.

    3. A01DRC7

      w/o Seat Memory System:

      Disconnect the power seat switch connector and remove the front power seat switch LH.

  6. REMOVE LUMBAR SWITCH ASSEMBLY

    A01DNFP

    1. Using a screwdriver, detach the 2 claws.

    2. Disconnect the lumbar switch connector and remove the lumbar switch.