FRONT SEAT CUSHION HEATER (for Walk in Seat Type) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.


  1. REMOVE FRONT SEAT ASSEMBLY


    1. Remove the front seat assembly Click here.

  2. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

    A01DU73E01
    Text in Illustration
    *1 Protective Tape

    1. Raise the reclining adjuster release handle to reveal the claw. Using a screwdriver, detach the claw and remove the handle.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE FRONT SEAT CUSHION SHIELD RH

    A01DQI5

    1. Remove the screw.

    2. Using a moulding remover, detach the 5 claws and 2 clips.

    3. Detach the cable clamp and remove the cushion shield.

  4. REMOVE FRONT SEAT INNER CUSHION SHIELD RH

    A01DMXS

    1. Using a moulding remover, detach the 5 claws and remove the cushion shield.

  5. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH


    1. for Manual Seat, Power Seat 4 Way Seat Type:

      Disconnect the 2 connectors and detach the 3 clamps.

    2. for Power Seat 8 Way Seat Type:

      Disconnect the 2 connectors and detach the 6 clamps.

    3. Remove the nut and front seat inner belt assembly RH.

  6. REMOVE SEAT CUSHION COVER WITH PAD


    1. A01DSPX

      Remove the rubber band from the seat cushion spring.

    2. A01DOPA

      Disconnect the seat heater connector and detach the wire harness clamp.

    3. A01DTFXE01
      Text in Illustration
      *1 Fastening Tape

      w/ Front Seat Side Airbag:


      1. Detach the fastening tape and open the cover.

      2. Disconnect the airbag wire harness.

    4. A01DQD7

      Using a moulding remover, remove the clip.

    5. A01DRT1

      Detach the hook.

    6. A01DOLQ

      Disconnect the seat heater connector and detach the 3 wire harness clamps.

    7. Detach the hooks.

      A01DMV4
    8. A01DQ6Y

      Detach the claw and disconnect the connector.

    9. Remove the seat cushion cover with pad.

  7. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

    A01DSQT

    1. Remove the hog rings and seat cushion cover from the seat cushion pad.

  8. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY RH

    A01DN1OE01
    Text in Illustration
    *1 Tack Pin

    1. Cut off the tack pins and remove the front seat cushion heater from the front seat cushion cover.