FRONT SEAT CUSHION HEATER (for Power Seat) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY


    1. Remove the front seat assembly Click here.

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    A01DUEA

    1. Using a moulding remover, detach the 2 claws and remove the slide and vertical power seat switch knob.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB

    A01DQE1

    1. Using a moulding remover, detach the 2 claws and remove the reclining power seat switch knob.

  4. REMOVE FRONT SEAT CUSHION SHIELD LH


    1. Disconnect the lifter motor connector.

    2. Remove the screw of the front seat No. 1 inner cushion shield LH and detach the guide.

    3. Detach the clip of the front seat No. 1 inner cushion shield LH.

    4. Using a moulding remover, detach the 3 claws and guide.

    5. Move the front seat cushion shield LH in the direction of the arrow to detach the clip and remove the front seat No. 1 inner cushion shield LH together with the front seat cushion shield LH as a unit.

      A01DP9D
    6. A01DMEL

      Detach the 3 claws and open the wire harness cover.

    7. Detach the 3 wire harness clamps and disconnect the seat wire connector.

  5. REMOVE FRONT POWER SEAT SWITCH LH


    1. Remove the 3 screws.

    2. A01DRFY

      w/ Seat Memory System:

      Disconnect the 2 power seat switch connectors and remove the front power seat switch LH.

    3. A01DRC7

      w/o Seat Memory System:

      Disconnect the power seat switch connector and remove the front power seat switch LH.

  6. REMOVE LUMBAR SWITCH ASSEMBLY (for Driver Side)

    A01DNFP

    1. Using a screwdriver, detach the 2 claws.

    2. Disconnect the lumbar switch connector and remove the lumbar switch.

  7. REMOVE FRONT SEAT INNER CUSHION SHIELD LH

    A01DU7M

    1. Using a moulding remover, detach the 3 claws and remove the front seat inner cushion shield LH.

  8. REMOVE FRONT SEAT INNER CUSHION SHIELD RH (for Front Passenger Side)

    A01DNOA

    1. Using a moulding remover, detach the 4 claws and remove the front seat inner cushion shield RH.

  9. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH


    1. for Driver Side:

      Click here

    2. for Front Passenger Side:

      Click here

  10. REMOVE SEAT CUSHION COVER WITH PAD


    1. A01DTTF

      Remove the rubber band from the seat cushion spring.

    2. A01DOTJ

      Disconnect the seat heater connector and detach the wire harness clamp.

    3. A01DMN0E01
      Text in Illustration
      *1 Fastening Tape

      w/ Front Seat Side Airbag:


      1. Detach the fastening tape and open the cover.

      2. Disconnect the airbag wire harness.

    4. A01DQ9A

      Detach the 2 hooks.

    5. A01DMN1

      Disconnect the seat heater connector and detach the 3 wire harness clamps.

    6. Detach the hooks.

      A01DMV4
    7. A01DQ6Y

      for Front Passenger Side:

      Detach the claw and disconnect the connector.

    8. Remove the seat cushion cover with pad.

  11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01DRK1

      Type A:


      1. Remove the hog rings and disconnect the straps.

    2. A01DS9KE01
      Text in Illustration
      *1 Tack Pin

      Type B:


      1. Cut off the tack pins and disconnect the straps.

    3. A01DSQT

      Remove the 15 hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.

  12. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH

    A01DN1OE01
    Text in Illustration
    *1 Tack Pin

    1. Cut off the tack pins and remove the front seat cushion heater from the front seat cushion cover.