Click here

POWER SEAT SWITCH (w/o Memory) INSTALLATION

Click here
Click here Click here
CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

Click here
  1. Click here

    INSTALL FRONT POWER SEAT SWITCH LH


    1. Connect the power seat switch connector.

    2. Install the power seat switch with the 3 screws.

  2. Click here

    INSTALL FRONT SEAT CUSHION SHIELD LH


    1. Attach the 3 wire harness clamps and connect the seat wire connector.

    2. Attach the 3 claws to close the wire harness cover.

    3. A01DNYZ

      Remove the clip attached to the separate type front seat cushion spring assembly and install it to the front seat cushion shield LH.

    4. Attach the 2 clips, 3 claws and guide.

    5. Attach the guide of the front seat No. 1 inner cushion shield LH and install the screw.

    6. Connect the lifter motor connector.

  3. Click here

    INSTALL RECLINING POWER SEAT SWITCH KNOB


    1. A01DNB3

      Attach the 2 claws to install the reclining power seat switch knob.

  4. Click here

    INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. Attach the 2 claws to install the slide and vertical power seat switch knob.

  5. Click here

    INSTALL FRONT SEAT ASSEMBLY


    1. Install the front seat assembly (Click here).