POWER SEAT SWITCH (w/o Memory) INSPECTION
-
INSPECT FRONT POWER SEAT SWITCH LH (for LHD)
-
Text in Illustration *1 Front Vertical Switch *2 Slide Switch *3 Lifter Switch *4 Reclining Switch *a Component without harness connected
(Front Power Seat Switch)
Measure the resistance according to the value(s) in the table below.
Standard Resistance Slide Switch Tester Connection Switch Condition Specified Condition 5 (SLDF) - 8 (B)
5 (SLDF) - 7 (B1)
Front Below 1 Ω 2 (SLDR) - 11 (E)
2 (SLDR) - 12 (E1)
5 (SLDF) - 11 (E)
5 (SLDF) - 12 (E1)
Off 2 (SLDR) - 11 (E)
2 (SLDR) - 12 (E1)
5 (SLDF) - 11 (E)
5 (SLDF) - 12 (E1)
Rear 2 (SLDR) - 8 (B)
2 (SLDR) - 7 (B1)
Front Vertical Switch Tester Connection Switch Condition Specified Condition 1 (FUP) - 8 (B)
1 (FUP) - 7 (B1)
Up Below 1 Ω 6 (FDWN) - 11 (E)
6 (FDWN) - 12 (E1)
1 (FUP) - 11 (E)
1 (FUP) - 12 (E1)
Off 6 (FDWN) - 11 (E)
6 (FDWN) - 12 (E1)
1 (FUP) - 11 (E)
1 (FUP) - 12 (E1)
Down 6 (FDWN) - 8 (B)
6 (FDWN) - 7 (B1)
Lifter Switch Tester Connection Switch Condition Specified Condition 3 (LUP) - 8 (B)
3 (LUP) - 7 (B1)
Up Below 1 Ω 4 (LDWN) - 11 (E)
4 (LDWN) - 12 (E1)
3 (LUP) - 11 (E)
3 (LUP) - 12 (E1)
Off 4 (LDWN) - 11 (E)
4 (LDWN) - 12 (E1)
3 (LUP) - 11 (E)
3 (LUP) - 12 (E1)
Down 4 (LDWN) - 8 (B)
4 (LDWN) - 7 (B1)
Reclining Switch Tester Connection Switch Condition Specified Condition 10 (RCLF) - 8 (B)
10 (RCLF) - 7 (B1)
Front Below 1 Ω 9 (RCLR) - 11 (E)
9 (RCLR) - 12 (E1)
10 (RCLF) - 11 (E)
10 (RCLF) - 12 (E1)
Off 9 (RCLR) - 11 (E)
9 (RCLR) - 12 (E1)
10 (RCLF) - 11 (E)
10 (RCLF) - 12 (E1)
Rear 9 (RCLR) - 8 (B)
9 (RCLR) - 7 (B1)
If the result is not as specified, replace the front power seat switch.
-
-
INSPECT FRONT POWER SEAT SWITCH RH (for LHD)
-
Text in Illustration *1 Slide Switch *2 Reclining Switch *a Component without harness connected
(Front Power Seat Switch)
for 4 Way Seat Type:
Measure the resistance according to the value(s) in the table below.
Standard Resistance Slide Switch Tester Connection Switch Condition Specified Condition 2 (SLDF) - 13 (B) Front Below 1 Ω 5 (SLDR) - 10 (E) 2 (SLDF) - 10 (E) Off 5 (SLDR) - 10 (E) 2 (SLDF) - 10 (E) Rear 5 (SLDR) - 13 (B) Reclining Switch Tester Connection Switch Condition Specified Condition 11 (RCLF) - 13 (B) Front Below 1 Ω 12 (RCLR) - 10 (E) 11 (RCLF) - 10 (E) Off 12 (RCLR) - 10 (E) 11 (RCLF) - 10 (E) Rear 12 (RCLR) - 13 (B) If the result is not as specified, replace the front power seat switch.
-
Text in Illustration *1 Front Vertical Switch *2 Slide Switch *3 Lifter Switch *4 Reclining Switch *a Component without harness connected
(Front Power Seat Switch)
for 8 Way Seat Type:
Measure the resistance according to the value(s) in the table below.
Standard Resistance Slide Switch Tester Connection Switch Condition Specified Condition 2 (SLDF) - 13 (B)
2 (SLDF) - 14 (B1)
Front Below 1 Ω 5 (SLDR) - 10 (E)
5 (SLDR) - 9 (E1)
2 (SLDF) - 10 (E)
2 (SLDF) - 9 (E1)
Off 5 (SLDR) - 10 (E)
5 (SLDR) - 9 (E1)
2 (SLDF) - 10 (E)
2 (SLDF) - 9 (E1)
Rear 5 (SLDR) - 13 (B)
5 (SLDR) - 14 (B1)
Front Vertical Switch Tester Connection Switch Condition Specified Condition 6 (FUP) - 13 (B)
6 (FUP) - 14 (B1)
Up Below 1 Ω 1 (FDWN) - 10 (E)
1 (FDWN) - 9 (E1)
6 (FUP) - 10 (E)
6 (FUP) - 9 (E1)
Off 1 (FDWN) - 10 (E)
1 (FDWN) - 9 (E1)
6 (FUP) - 10 (E)
6 (FUP) - 9 (E1)
Down 1 (FDWN) - 13 (B)
1 (FDWN) - 14 (B1)
Lifter Switch Tester Connection Switch Condition Specified Condition 4 (LUP) - 13 (B)
4 (LUP) - 14 (B1)
Up Below 1 Ω 3 (LDWN) - 10 (E)
3 (LDWN) - 9 (E1)
4 (LUP) - 10 (E)
4 (LUP) - 9 (E1)
Off 3 (LDWN) - 10 (E)
3 (LDWN) - 9 (E1)
4 (LUP) - 10 (E)
4 (LUP) - 9 (E1)
Down 3 (LDWN) - 13 (B)
3 (LDWN) - 14 (B1)
Reclining Switch Tester Connection Switch Condition Specified Condition 11 (RCLF) - 13 (B)
11 (RCLF) - 14 (B1)
Front Below 1 Ω 12 (RCLR) - 10 (E)
12 (RCLR) - 9 (E1)
11 (RCLF) - 10 (E)
11 (RCLF) - 9 (E1)
Off 12 (RCLR) - 10 (E)
12 (RCLR) - 9 (E1)
11 (RCLF) - 10 (E)
11 (RCLF) - 9 (E1)
Rear 12 (RCLR) - 13 (B)
12 (RCLR) - 14 (B1)
If the result is not as specified, replace the front power seat switch.
-
-
INSPECT FRONT POWER SEAT SWITCH RH (for RHD)
-
Text in Illustration *1 Front Vertical Switch *2 Slide Switch *3 Lifter Switch *4 Reclining Switch *a Component without harness connected
(Front Power Seat Switch)
Measure the resistance according to the value(s) in the table below.
Standard Resistance Slide Switch Tester Connection Switch Condition Specified Condition 2 (SLDF) - 13 (B)
2 (SLDF) - 14 (B1)
Front Below 1 Ω 5 (SLDR) - 10 (E)
5 (SLDR) - 9 (E1)
2 (SLDF) - 10 (E)
2 (SLDF) - 9 (E1)
Off 5 (SLDR) - 10 (E)
5 (SLDR) - 9 (E1)
2 (SLDF) - 10 (E)
2 (SLDF) - 9 (E1)
Rear 5 (SLDR) - 13 (B)
5 (SLDR) - 14 (B1)
Front Vertical Switch Tester Connection Switch Condition Specified Condition 6 (FUP) - 13 (B)
6 (FUP) - 14 (B1)
Up Below 1 Ω 1 (FDWN) - 10 (E)
1 (FDWN) - 9 (E1)
6 (FUP) - 10 (E)
6 (FUP) - 9 (E1)
Off 1 (FDWN) - 10 (E)
1 (FDWN) - 9 (E1)
6 (FUP) - 10 (E)
6 (FUP) - 9 (E1)
Down 1 (FDWN) - 13 (B)
1 (FDWN) - 14 (B1)
Lifter Switch Tester Connection Switch Condition Specified Condition 4 (LUP) - 13 (B)
4 (LUP) - 14 (B1)
Up Below 1 Ω 3 (LDWN) - 10 (E)
3 (LDWN) - 9 (E1)
4 (LUP) - 10 (E)
4 (LUP) - 9 (E1)
Off 3 (LDWN) - 10 (E)
3 (LDWN) - 9 (E1)
4 (LUP) - 10 (E)
4 (LUP) - 9 (E1)
Down 3 (LDWN) - 13 (B)
3 (LDWN) - 14 (B1)
Reclining Switch Tester Connection Switch Condition Specified Condition 11 (RCLF) - 13 (B)
11 (RCLF) - 14 (B1)
Front Below 1 Ω 12 (RCLR) - 10 (E)
12 (RCLR) - 9 (E1)
11 (RCLF) - 10 (E)
11 (RCLF) - 9 (E1)
Off 12 (RCLR) - 10 (E)
12 (RCLR) - 9 (E1)
11 (RCLF) - 10 (E)
11 (RCLF) - 9 (E1)
Rear 12 (RCLR) - 13 (B)
12 (RCLR) - 14 (B1)
If the result is not as specified, replace the front power seat switch.
-
-
INSPECT FRONT POWER SEAT SWITCH LH (for RHD)
-
Text in Illustration *1 Slide Switch *2 Reclining Switch *a Component without harness connected
(Front Power Seat Switch)
Measure the resistance according to the value(s) in the table below.
Standard Resistance Slide Switch Tester Connection Switch Condition Specified Condition 5 (SLDF) - 8 (B) Front Below 1 Ω 2 (SLDR) - 11 (E) 5 (SLDF) - 11 (E) Off 2 (SLDR) - 11 (E) 5 (SLDF) - 11 (E) Rear 2 (SLDR) - 8 (B) Reclining Switch Tester Connection Switch Condition Specified Condition 10 (RCLF) - 8 (B) Front Below 1 Ω 9 (RCLR) - 11 (E) 10 (RCLF) - 11 (E) Off 9 (RCLR) - 11 (E) 10 (RCLF) - 11 (E) Rear 9 (RCLR) - 8 (B) If the result is not as specified, replace the front power seat switch.
-