SEAT MEMORY SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL SEAT MEMORY SWITCH

    A01DUAR

    1. Install the switch with the 2 screws.

  2. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. Install the multiplex network master switch assembly with the 3 screws.

  3. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP LH


    1. A01DTJY

      Install the front door inner glass weatherstrip.

  4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. A01DNFL

      Connect the front door lock remote control cable assembly and front door inside locking cable assembly.

    2. Connect 2 connectors.

    3. w/ Seat Position Memory System:


      1. Connect the connectors.

    4. A01DN8I

      Attach the front door trim board sub-assembly by attaching the 4 claws of the front door inner glass weatherstrip as shown in the illustration.

    5. A01DSFI

      Attach the 12 clips and front door trim board retainer to install the front door trim board sub-assembly.

    6. Install the 3 screws.

  5. INSTALL ASSIST GRIP COVER LH


    1. A01DNFX

      Attach the 8 claws to install the assist grip cover.

  6. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH


    1. A01DNQ2

      Attach the 3 claws to install the inside handle bezel.

  7. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH


    1. Attach the 2 claws to install the front door lower frame bracket garnish.