REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type LH Side) INSPECTION

Note

After performing this inspection, be sure to perform initialization (initial position reset and initial position memorization) of the fold seat control ECU Click here.


  1. INSPECT NO. 3 SEATBACK FRAME SUB-ASSEMBLY LH


    1. Check the operation of the seatback frame.


      1. A01DS30E01
        Text in Illustration
        *a

        Component without harness connected

        (No. 3 Seatback Frame LH)
        A01DQPB Front
        A01DMKT Rear

        Apply battery voltage to the power seat motor, and check that the seatback moves smoothly as follows.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 3

        Battery negative (-) → 4

        		 Front

        Battery positive (+) → 4

        Battery negative (-) → 3

        		 Rear

        If the result is not as specified, replace the No. 3 seatback frame LH.

  2. INSPECT NO. 3 SEATBACK FRAME SUB-ASSEMBLY RH


    1. Check the operation of the seatback frame.


      1. A01DNNWE01
        Text in Illustration
        *a

        Component without harness connected

        (No. 3 Seatback Frame RH)
        A01DQPB Front
        A01DMKT Rear

        Apply battery voltage to the power seat motor, and check that the seatback moves smoothly as follows.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 3

        Battery negative (-) → 4

        		 Front

        Battery positive (+) → 4

        Battery negative (-) → 3

        		 Rear

        If the result is not as specified, replace the No. 3 seatback frame RH.

  3. INSPECT NO. 3 SEAT LEG ASSEMBLY LH


    1. Check the operation of the seat leg.


      1. A01DNGWE01
        Text in Illustration
        *1 Seat Leg Arm
        *a

        Component without harness connected

        (No. 3 Seat Leg Assembly LH)
        A01DQPB Front
        A01DMKT Rear

        Apply battery voltage to the power seat motor, and check that the seat leg arm moves smoothly as follows.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 3

        Battery negative (-) → 4

        		 Front

        Battery positive (+) → 4

        Battery negative (-) → 3

        		 Rear

        If the result is not as specified, replace the No. 3 seat leg assembly.

  4. INSPECT NO. 2 SEAT LEG ASSEMBLY (for RH Side)


    1. Check the operation of the seat leg.


      1. A01DP10E01
        Text in Illustration
        *1 Seat Leg Arm
        *a

        Component without harness connected

        (No. 2 Seat Leg Assembly)
        A01DQPB Front
        A01DMKT Rear

        Apply battery voltage to the power seat motor, and check that the seat leg arm moves smoothly as follows.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 3

        Battery negative (-) → 4

        		 Front

        Battery positive (+) → 4

        Battery negative (-) → 3

        		 Rear

        If the result is not as specified, replace the No. 2 seat leg assembly.