REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type LH Side) DISASSEMBLY

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE REAR SEAT HEADREST ASSEMBLY


    1. Remove the headrest.

  2. REMOVE CAP


    1. A01DRCE

      Remove the 2 caps.

  3. REMOVE REAR SEAT LOWER CUSHION HINGE COVER LH


    1. A01DMD9

      Remove the 2 screws.

    2. Detach the 3 claws and remove the cover.

  4. REMOVE REAR SEAT LOWER CUSHION HINGE COVER RH


    1. A01DMOUE01
      Text in Illustration
      *1 Guide

      Remove the 2 screws.

    2. Detach the 2 claws and guide and remove the cover.

  5. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY LH

    A01DTQZ

    1. Using a T45 "TORX" socket wrench, remove the bolt and inner belt assembly.

  6. REMOVE REAR NO. 1 SEAT CUSHION MOULDING


    1. A01DRCKE01
      Text in Illustration
      *1 Guide

      Using a clip remover, remove the 2 clips.

    2. Detach the 2 claws and 4 guides and remove the moulding.

  7. REMOVE SEAT CUSHION COVER WITH PAD


    1. A01DQFTE01
      Text in Illustration
      *1 Fastener

      Open the 2 fasteners.

    2. A01DRU9

      Using a clip remover, remove the 2 clips and open the under part of the seat cushion cover.

    3. A01DRRUE01
      Text in Illustration
      *1 Hook

      Detach the 2 hooks and remove the seat cushion cover with pad.

  8. REMOVE NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY LH


    1. A01DLVPE01
      Text in Illustration
      *1 Fastener

      Detach the fastener.

    2. Remove the hog rings and seat cushion cover.

  9. REMOVE REAR SEAT CUSHION INNER EDGE PROTECTOR LH


    1. A01DSJVE01
      Text in Illustration
      *1 Tack Pin

      Cut off the tack pins and remove the edge protector from the seat cushion pad.

  10. REMOVE REAR NO. 2 SEAT CUSHION MOULDING


    1. A01DSD9

      Remove the 2 screws.

    2. Detach the 2 claws and remove the moulding.

  11. REMOVE NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY LH


    1. Operate the rear No. 2 seat lock control lever and retract the seat cushion frame.

    2. A01DMA4

      Using a T40 "TORX" socket wrench, remove the 4 "TORX" bolts and remove the seat cushion frame.

  12. REMOVE 3RD SEAT LINK SUB-ASSEMBLY LH


    1. A01DNWEE01
      Text in Illustration
      *1 Guide

      Remove the 3 clips.

    2. Detach the 2 claws and 4 guides and remove the 3rd seat link.

  13. REMOVE REAR NO. 2 SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH


    1. A01DSBKE01
      Text in Illustration
      *1 Cable End
      *2 Clamp

      Detach the clamp.

    2. Twist the cable end in the direction indicated by the arrow and disconnect the cable.

    3. A01DMMQE01
      Text in Illustration
      *1 Guide

      Remove the screw.

    4. Detach the 2 guides and remove the lever.

  14. REMOVE REAR SEAT LEG COVER LH


    1. A01DQUAE01
      Text in Illustration
      *1 Hook

      Remove the clip.

    2. Detach the 3 hooks and 5 clips and remove the cover.

  15. REMOVE REAR NO. 3 SEAT LEG COVER LH


    1. A01DTY7

      Detach the 2 claws and remove the cover.

  16. REMOVE REAR SEAT CUSHION INNER HINGE COVER LH


    1. A01DSS2E01
      Text in Illustration
      *1 Guide

      Remove the screw and clip.

    2. Detach the guide and remove the cover.

  17. REMOVE REAR SEAT CUSHION INNER HINGE COVER RH


    1. A01DNZ7E01
      Text in Illustration
      *1 Guide

      Remove the screw and clip.

    2. Detach the guide and remove the cover.

  18. REMOVE REAR SEAT LOCK CONTROL CABLE LH


    1. A01DN11E01
      Text in Illustration
      *1 Clamp
      *2 Cable End

      Detach the clamp.

    2. Twist the cable end in the direction indicated by the arrow and remove the cable.

  19. REMOVE REAR NO. 1 SEATBACK LOCK STRIKER COVER


    1. A01DTAEE01
      Text in Illustration
      *1 Guide
      *2 Protective Tape

      Using a screwdriver, detach the claw and guide and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  20. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH


    1. A01DPDAE01
      Text in Illustration
      *1 Clamp
      *2 Cable End
      *3 Guide

      Remove the 2 screws.

    2. Detach the guide and remove the lever.

    3. Detach the clamp.

    4. Twist the cable end in the direction indicated by the arrow and disconnect the cable.

  21. REMOVE ROPE HOOK ASSEMBLY


    1. A01DOSRE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and open the cover.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01DMWB

      Remove the bolt and rope hook.

  22. REMOVE REAR NO. 2 SEATBACK LOCK STRIKER COVER


    1. A01DP6DE01
      Text in Illustration
      *1 Guide
      *2 Protective Tape

      Using a screwdriver, detach the claw and guide and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  23. REMOVE REAR SEAT LOCK RELEASE LEVER ASSEMBLY


    1. A01DOTTE01
      Text in Illustration
      *1 Hook

      Remove the 2 screws.

    2. Detach the hook and remove the lever.

    3. A01DQSSE01
      Text in Illustration
      *1 Cable End
      *2 Clamp

      Detach the 2 clamps.

    4. Twist the 2 cable ends in the direction indicated by the arrow and disconnect the 2 cables.

  24. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH


    1. A01DMYF

      Detach the 7 clips and remove the board.

  25. REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY


    1. A01DMQ7

      Detach the 4 claws and remove the 2 headrest supports.

  26. REMOVE SEATBACK COVER WITH PAD


    1. A01DPOIE01
      Text in Illustration
      *1 Hook

      Detach the hooks and remove the seatback cover with pad.

  27. REMOVE REAR NO. 3 SEATBACK COVER SUB-ASSEMBLY LH


    1. A01DPDP

      Remove the hog rings and seatback cover.

  28. REMOVE REAR NO. 2 SEATBACK EDGE PROTECTOR


    1. A01DQHRE01
      Text in Illustration
      *1 Tack Pin

      Cut off the tack pins and remove the protector from the seatback pad.

  29. REMOVE NO. 2 SEATBACK COVER


    1. A01DPII

      Detach the 2 claws and remove the cover.

  30. REMOVE REAR NO. 3 SEAT INNER RECLINING COVER LH


    1. A01DRHE

      Detach the 4 claws and remove the cover.

  31. REMOVE REAR NO. 3 SEAT OUTER RECLINING COVER LH


    1. A01DM44E01
      Text in Illustration
      *1 Guide

      Remove the screw.

    2. Detach the guide and 2 claws and remove the cover.

  32. REMOVE REAR NO. 2 SEAT INNER RECLINING COVER LH


    1. A01DLU4

      Detach the 5 claws and remove the cover.

  33. REMOVE REAR NO. 2 SEAT OUTER RECLINING COVER LH


    1. A01DT9GE01
      Text in Illustration
      *1 Guide

      Remove the screw.

    2. Detach the guide and 2 claws and remove the cover.

  34. REMOVE FOLD SEAT LOCK CONTROL CABLE SUB-ASSEMBLY


    1. A01DU0RE01
      Text in Illustration
      *1 Clamp A
      *2 Clamp B
      *3 Cable Tie
      *4 Cable End

      Remove the clamp labeled B and detach the 2 labeled clamps A.

    2. Cut off the 2 cable ties.

    3. Twist the cable end in the direction indicated by the arrow and remove the cable.

  35. REMOVE NO. 2 SEAT LOCK CABLE


    1. A01DMZDE01
      Text in Illustration
      *1 Clamp
      *2 Cable End

      Detach the clamp.

    2. Twist the cable end in the direction indicated by the arrow and remove the cable.

  36. REMOVE NO. 3 SEATBACK FRAME SUB-ASSEMBLY LH


    1. A01DPE8

      Using a T45 "TORX" socket wrench, remove the 4 "TORX" bolts and frame.

  37. REMOVE NO. 3 SEAT LEG ASSEMBLY LH


    1. A01DRDW

      Remove the 4 clips and seat cushion under carpet LH from the No. 3 seat leg.

  38. REMOVE NO. 2 SEAT LEG ASSEMBLY (for RH Side)


    1. A01DNI2

      Remove the 4 clips and seat cushion under carpet RH from the No. 2 seat leg.