REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Tumble Seat Type LH Side) INSTALLATION


  1. INSTALL REAR NO. 1 SEAT ASSEMBLY LH


    1. Place the seat in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Temporarily install the seat with the 3 bolts and nut.

    3. A01DSSPE01

      Tighten the bolts and nut in the order indicated in the illustration.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  2. INSTALL REAR NO. 3 SEAT CUSHION HINGE COVER


    1. Attach the claw to install the cover.

  3. INSTALL REAR NO. 4 SEAT CUSHION HINGE COVER


    1. Attach the claw to install the cover.

  4. INSTALL REAR NO. 1 SEAT CUSHION HINGE COVER


    1. Return the seat to the upright position.

    2. A01DTWP

      Attach the 2 guides and 6 claws to install the cover.

  5. INSTALL REAR NO. 2 SEAT CUSHION HINGE COVER


    1. A01DRJ1

      Attach the 2 guides and 6 claws to install the cover.

  6. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY


    1. Install the headrest.

  7. INSTALL REAR SEAT HEADREST ASSEMBLY


    1. Install the headrest.