REAR POWER SEAT CONTROL SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

Tech Tips

Use the following procedures to troubleshoot the rear power seat control system.


  1. VEHICLE BROUGHT TO WORKSHOP


    NEXT

  2. INSPECT BATTERY VOLTAGE

    Standard voltage
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding.


    NEXT

  3. PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table Click here.

      Result
      Result Proceed to
      Fault is not listed in problem symptoms table A
      Fault is listed in problem symptoms table B

      B

      Go to step 5
      A

  4. OVERALL ANALYSIS AND TROUBLESHOOTING


    1. Operation check Click here

    2. Terminals of ECU Click here


      NEXT

  5. ADJUST, REPAIR OR REPLACE


    NEXT

  6. CONFIRMATION TEST


    NEXT
    END