PRE-CRASH SAFETY SYSTEM, Diagnostic DTC:B2090

DTC Code DTC Name
B2090 Driving Support System Malfunction

DESCRIPTION

The seat belt control ECU receives collision information from the driving support ECU and skid control ECU via CAN communication and tightens the seat belt by operating the motor inside the front seat outer belt.

When the driving support ECU detects a malfunction in the dynamic radar cruise control system or pre-crash safety system (Pre-Crash 2), the malfunction information is sent to the seat belt control ECU, which stores this DTC.

When DTC B2090 is stored, other DTCs stored by the driving support ECU (dynamic radar cruise control system and Pre-Crash 2) are also stored.

DTC Code DTC Detection Condition Trouble Area
B2090 During the initial check, while the ignition switch is ON or while the pre-crash safety system is operating, the driving support ECU detects a malfunction in the dynamic radar cruise control system or pre-crash safety system (Pre-Crash 2) for 1 second or more.

  • Dynamic radar cruise control system

  • Pre-crash safety system (Pre-Crash 2)

  • Seat belt control ECU

INSPECTION PROCEDURE

Tech Tips

When clearing the DTCs, first clear the DTCs output from the driving support ECU, and then clear the DTCs output from the seat belt control ECU.

PROCEDURE


  1. CHECK FOR DTC (DYNAMIC RADAR CRUISE CONTROL SYSTEM)


    1. Check for DTCs Click here.

      OK
      Dynamic radar cruise control system DTCs are not output.

    NG

    GO TO DYNAMIC RADAR CRUISE CONTROL SYSTEM Click here

    OK

  2. CHECK FOR DTC (DRIVING SUPPORT ECU)


    1. Check for DTCs Click here.

      OK
      DTCs for Pre-Crash 2 are not output.

    NG

    GO TO DIAGNOSTIC TROUBLE CODE CHART Click here

    OK

  3. CHECK FOR DTC


    1. Clear the DTCs Click here.

    2. Check for DTCs Click here.

      OK
      DTC B2090 is not output.

    NG

    REPLACE SEAT BELT CONTROL ECU Click here

    OK

    USE SIMULATION METHOD TO CHECK Click here