Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
INSTALL AIRBAG CUTOFF SWITCH CYLINDER SUB-ASSEMBLY
Attach the 2 claws to install the cutoff switch cylinder.
INSTALL INSTRUMENT SIDE PANEL RH
Connect the connector.
Attach the 5 clips, claw and 3 guides to install the instrument side panel.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
CHECK SRS WARNING LIGHT
Check the SRS warning light Click here.