CENTER AIRBAG SENSOR ASSEMBLY REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. Click here

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE CONSOLE BOX ASSEMBLY


    1. for Automatic Transmission:


      1. Remove the console box assembly Click here.

    2. for Manual Transmission:


      1. Remove the console box assembly Click here.

    3. w/ Refrigerated Cool Box:


      1. Remove the console box assembly Click here.

  3. REMOVE AIRBAG SENSOR ASSEMBLY


    1. A01DU5C

      Disconnect the connector.

    2. Remove the 3 bolts and airbag sensor.