CURTAIN SHIELD AIRBAG ASSEMBLY

Click here

Click here Click here

Tip:

Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.

Click here

Click here
INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Rear No. 2 Seat)
1. Install the curtain shield airbag with the 17 new bolts.
  
  9.8 N*m 100 kgf*cm 87 in.*lbf
  
  Note:
  Do not twist the curtain shield airbag when installing it.
2. Connect the connector.
  
  Note:
  When handling the airbag connector, take care not to damage the airbag wire harness.
Click here
INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/o Rear No. 2 Seat)
1. Install the curtain shield airbag with the 13 new bolts.
  
  9.8 N*m 100 kgf*cm 87 in.*lbf
  
  Note:
  Do not twist the curtain shield airbag when installing it.
2. Connect the connector.
  
  Note:
  When handling the airbag connector, take care not to damage the airbag wire harness.
Click here
INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (for 3 Door)
1. Install the curtain shield airbag with the 11 new bolts.
  
  9.8 N*m 100 kgf*cm 87 in.*lbf
  
  Note:
  Do not twist the curtain shield airbag when installing it.
2. Connect the connector.
  
  Note:
  When handling the airbag connector, take care not to damage the airbag wire harness.
Click here
INSTALL REAR NO. 2 SIDE RAIL SPACER LH (for 3 Door)
1. Attach the 4 claws to install the rear side rail spacer.
2. Install the clip.
Click here
INSTALL NO. 1 AIR DUCT REAR SIDE (w/ Rear Cooler)
1. Insert the upper part of the duct into the roof side duct and, using that point as a pivot point, swing the duct into place and install it to the rear cooling unit.
2. Attach the 2 claws to install the cooler plate.
Click here
INSTALL NO. 2 AIR DUCT REAR SIDE (w/ Rear Cooler)
1. Install the duct with the 2 clips and attach the clamp.
Click here
INSTALL ROOF HEADLINING ASSEMBLY
1. for 5 Door:
  1. Install the roof headlining (Click here).
2. for 3 Door:
  1. Install the roof headlining (Click here).

CURTAIN SHIELD AIRBAG ASSEMBLY INSTALLATION