BACK DOOR COURTESY SWITCH INSPECTION


  1. INSPECT BACK DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. A01DRX9E21
      Text in Illustration
      *a

      Component without harness connected

      (Back Door Courtesy Light Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - Switch body Pin not pushed Below 1 Ω
      Pin pushed 10 kΩ or higher

      If the result is not as specified, replace the back door courtesy light switch assembly.