LIGHTING SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Data List.

    5. According to the display on the intelligent tester, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ACC SW Ignition switch ACC signal / ON or OFF

      ON: Ignition switch ACC

      OFF: Ignition switch off

      		 -
      IG SW Ignition switch ON signal / ON or OFF

      ON: Ignition switch ON

      OFF: Ignition switch off

      		 -
      RR Door Courtesy SW*1 Rear door courtesy light switch RH signal / ON or OFF

      ON: Rear door RH open

      OFF: Rear door RH closed

      		 -
      RL Door Courtesy SW*1 Rear door courtesy light switch LH signal / ON or OFF

      ON: Rear door LH open

      OFF: Rear door LH closed

      		 -
      Back Door Courtesy SW Back door courtesy switch signal / ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      Glass Hatch Courtesy Switch*2 Glass hatch courtesy switch signal / ON or OFF

      ON: Glass hatch open

      OFF: Glass hatch closed

      		 -
      FR Door Courtesy Front door courtesy light switch RH signal / ON or OFF

      ON: Front door RH closed

      OFF: Front door RH open

      		 -
      FL Door Courtesy Front door courtesy light switch LH signal / ON or OFF

      ON: Front door LH closed

      OFF: Front door LH open

      		 -
      Lounge Illumination Value SW (UP)*3 Room light switch (up) signal / ON or OFF

      ON: Room light switch (up) on

      OFF: Room light switch (up) off

      		 -
      Lounge Illumination Value SW (Dwn)*3 Room light switch (down) signal / ON or OFF

      ON: Room light switch (down) on

      OFF: Room light switch (down) off

      		 -

      • *1: for 5 Door

      • *2: w/ Glass Hatch Opener System

      • *3: w/ Door Illumination

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Active Test.

    5. According to the display on the intelligent tester, perform the Active Test.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Illuminated Entry System Map light, No. 1 room light and No. 2 room light ON/OFF -
      Step Light Operation*1 Interior foot light, inside handle illumination, ornament illumination and door pocket illumination ON/OFF -
      Interior Panel Relay Interior panel relay ON/OFF -
      Cent Consol Spot LGT Center console spot light ON/OFF -
      Dimmer Signal Illumination dimming ON/OFF -
      Relay for Interior Light Auto Cut Function*2 DOME relay ON/OFF -

      • *1: w/ Interior Foot Light

      • *2: After turning the ignition switch on, proceed to the preceding screen of the active test screen with the intelligent tester and turn the ignition switch off, and perform the active test.