Click here

ENGINE HOOD COURTESY SWITCH REMOVAL

Click here
Click here Click here
Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here
  1. Click here

    REMOVE UPPER RADIATOR SUPPORT SEAL


    1. Remove the 13 clips and upper radiator support seal.

  2. Click here

    REMOVE RADIATOR GRILLE


    1. Put protective tape around the radiator grille.

    2. Remove the 4 screws.

    3. Detach the 8 claws and remove the radiator grille.

      Table 1. Text in Illustration
      *1 Protective Tape
  3. Click here

    REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)


    1. Disconnect the sensor connector.

    2. Remove the 3 bolts and millimeter wave radar sensor assembly.

  4. Click here

    REMOVE HOOD LOCK RELEASE LEVER PROTECTOR


    1. A01DU1HE01

      Detach the 2 clamps, 2 guides and remove the hood lock release lever protector.

      Table 2. Text in Illustration
      *a Clamp
      *b Guide
  5. Click here

    REMOVE HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)


    1. A01DSU3

      Remove the 3 bolts.

    2. A01DUG0

      Disconnect the connector.

    3. Disconnect the hood lock control cable assembly and remove the hood lock assembly (engine hood courtesy switch).