INTRUSION SENSOR REMOVAL


  1. REMOVE MAP LIGHT ASSEMBLY


    1. A01DOJ7

      Detach the 4 clips.

    2. Disconnect the connector and remove the map light.

  2. REMOVE THEFT WARNING RADAR SENSOR


    1. Disconnect the connector.

    2. A01DTHH

      Remove all the tape and the 2 screws.

    3. Detach the clamp and disconnect the central part of the theft warning radar sensor.

    4. A01DURL

      Using a thin-bladed screwdriver, push the bezel down lightly.

      Tech Tips


      • Perform the same procedure on the other side.

      • Tape the screwdriver tip before use.

    5. A01DNXT

      Insert the thin-bladed screwdriver into the cutout portion of the bezel and remove the bezel from the map light.

      Tech Tips


      • Perform the same procedure on the other side.

      • Tape the screwdriver tip before use.

    6. A01DQ13

      Disconnect the 2 connectors.

    7. A01DQRV

      Remove the 2 screws and theft warning radar sensor.

      Tech Tips

      Perform the same procedure on the other side.