DATA LIST
Tech Tips
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Data List.
According to the display on the intelligent tester, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| ACC SW | Ignition switch status / ON or OFF | ON: Ignition switch ACC OFF: Ignition switch off |
- |
| IG SW | Ignition switch status / ON or OFF | ON: Ignition switch ON OFF: Ignition switch off |
- |
| RR Door Courtesy SW*1 | Rear RH side door courtesy light switch signal / ON or OFF | ON: Rear RH side door open OFF: Rear RH side door closed |
- |
| RL Door Courtesy SW*1 | Rear LH side door courtesy light switch signal / ON or OFF | ON: Rear LH side door open OFF: Rear LH side door closed |
- |
| Back Door Courtesy SW | Back door courtesy light switch signal / ON or OFF | ON: Back door open OFF: Back door closed |
- |
| Back Door Lock Pos SW | Back door lock position switch status / ON or OFF | ON: Back door unlocked OFF: Back door locked |
- |
| Glass Hatch Courtesy Switch*2 | Glass hatch courtesy switch signal / ON or OFF | ON: Glass hatch open OFF: Glass hatch closed |
- |
| Glass Hatch Opener Switch*2 | Glass hatch opener switch signal / ON or OFF | ON: Glass hatch opener switch pushed OFF: Glass hatch opener switch not pushed |
- |
| Door Key SW-Lock | Door key linked lock switch signal / ON or OFF | ON: Driver side door key cylinder turned to lock position OFF: Driver side door key cylinder not turned |
- |
| D-Door Key SW-UL | Door key linked unlock switch signal / ON or OFF | ON: Driver side door key cylinder turned to unlock position OFF: Driver side door key cylinder not turned |
- |
| FR Door Lock Pos | Front RH side door lock position switch signal / UNLOCK or LOCK | UNLOCK: Front RH side door unlocked LOCK: Front RH side door locked |
- |
| FR Door Courtesy | Front RH side door courtesy light switch signal / ON or OFF | OFF: Front RH side door closed ON: Front RH side door open |
- |
| FL Door Lock Pos | Front LH side door lock position switch signal / UNLOCK or LOCK | UNLOCK: Front LH side door unlocked LOCK: Front LH side door locked |
- |
| FL Door Courtesy | Front LH side door courtesy light switch signal / ON or OFF | OFF: Front LH side door closed ON: Front LH side door open |
- |
| Hood Courtesy SW | Security courtesy switch / ON or OFF | ON: Engine hood open OFF: Engine hood closed |
- |
| RR-Door Lock Pos SW*1 | Rear RH side door lock position switch signal / ON or OFF | ON: Rear RH side door unlocked OFF: Rear RH side door locked |
- |
| RL-Door Lock Pos SW*1 | Rear LH side door lock position switch signal / ON or OFF | ON: Rear LH side door unlocked OFF: Rear LH side door locked |
- |
| Intrusion Sens OFF SW*3 | Intrusion sensor OFF switch / ON or OFF | ON: Intrusion sensor OFF switch pushed OFF: Intrusion sensor OFF switch not pushed |
- |
| Intrusion Sensor*3 | Intrusion sensor detection / ON or OFF | ON: Moving object detected by sensor OFF: No moving object detected by sensor |
- |
| Tilt Sensor*4 | Tilt sensor detection / ON or OFF | ON: Vehicle tilt detected by sensor OFF: Vehicle tilt not detected by sensor |
- |
| Intrusion Sen Conn*3 | Intrusion sensor connecting / ON or OFF | ON: Intrusion sensor connected OFF: Intrusion sensor not connected |
- |
| Tilt Sensor Connect*4 | Tilt sensor connecting / ON or OFF | ON: Tilt sensor connected OFF: Tilt sensor not connected |
- |
| Sealed Glas Brak Sen*5 | Glass breakage sensor detection / With or Without | With: Glass breakage sensor operating Without: Glass breakage sensor not operating |
- |
| The Number of DTC | Number of trouble codes / Min.: 0, Max.: 255 | Number of stored DTCs displayed | - |
*1: for 5 Door
*2: w/ Glass Hatch Opener System
*3: w/ Intrusion Sensor
*4: w/ Tilt Sensor
*5: w/ Glass Breakage Sensor
ACTIVE TEST
Tech Tips
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Active Test.
According to the display on the intelligent tester, perform the Active Test.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Security Indicator | Security indicator | ON/OFF | The test is possible when the following conditions are met:
|
| Security Horn2*3 | Theft warning siren (self power siren) | ON/OFF | - |
| Vehicle Horn | Vehicle horns | ON/OFF | - |
| Security Horn*4 | Security Horn | ON/OFF | - |
| Power For Intrusion Sensor*5 | Intrusion sensor power supply | ON/OFF | - |
| Power For Tilt Sensor*6 | Tilt sensor power supply | ON/OFF | - |
*1: w/ Entry and Start System
*2: w/o Entry and Start System
*3: w/ Security Siren
*4: w/ Security Horn
*5: w/ Intrusion Sensor
*6: w/ Tilt Sensor