DOOR CONTROL RECEIVER (for 3 Door) INSTALLATION


  1. INSTALL DOOR CONTROL RECEIVER


    1. Install the receiver with the bolt.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Connect the connector.

  2. INSTALL REAR QUARTER TRIM PANEL ASSEMBLY LH


    1. Attach the 4 claws and 2 guides and pass the rear No. 1 seat outer belt floor anchor through the rear quarter trim panel.

    2. Attach the 7 clips to install the rear quarter trim panel.

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH


    1. Attach the 9 claws and 11 clips to install the deck trim side panel.

    2. Install the 3 bolts and 2 screws.

    3. Install the rear No. 1 seat outer belt floor anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    4. Install the front seat outer belt floor anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  4. INSTALL OUTER LAP BELT ANCHOR COVER

    Tech Tips

    Use the same procedure for the other outer lap belt anchor cover.


    1. Attach the 3 claws to install the outer lap belt anchor cover.

  5. INSTALL QUARTER TRIM POCKET TRAY


    1. Attach the 6 claws and 2 guides to install the quarter trim pocket tray.

  6. INSTALL FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

    Tech Tips

    Use the same procedure for the other front deck side trim cover.


    1. Attach the 2 claws to install the front deck side trim cover.

  7. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

    Tech Tips

    Use the same procedure for the other tonneau cover holder cap.


    1. Attach the 2 claws to install the tonneau cover holder cap.

  8. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Tech Tips

    Use the same procedure for the other No. 1 luggage compartment trim hook.


    1. Install the No. 1 luggage compartment trim hook so that it is positioned horizontally.

  9. INSTALL REAR FLOOR CARPET ASSEMBLY


    1. Install the rear floor carpet.

  10. INSTALL QUARTER TRIM COVER HOLE LH


    1. Attach the 2 claws and 2 guides to install the quarter trim cover hole.

  11. INSTALL QUARTER TRIM COVER HOLE RH

    Tech Tips

    Use the same procedure described for the LH side.

  12. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE


    1. Attach the 6 claws to install the rear floor mat rear support plate.

    2. Install the 5 screws.

  13. INSTALL MAT SET PLATE COVER

    Tech Tips

    Use the same procedure for all mat set plate covers.


    1. Attach the 2 claws to install the mat set plate cover.

  14. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Install the tonneau cover.

  15. INSTALL REAR NO. 1 SEAT ASSEMBLY (w/ Rear No. 1 Seat)


    1. for LH Side:

      Install the rear No. 1 seat assembly Click here.

    2. for RH Side:

      Install the rear No. 1 seat assembly Click here.

  16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.