BACK DOOR LOCK INSPECTION


  1. INSPECT BACK DOOR WITH MOTOR LOCK ASSEMBLY


    1. A01DSVQE01

      Apply the battery voltage to the door lock motor and check the operation of the door lock motor.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 4 (ACT+)

      Battery negative (-) → 1 (ACT-)

      		 Lock

      Battery positive (+) → 1 (ACT-)

      Battery negative (-) → 4 (ACT+)

      		 Unlock

      • If the result is not as specified, replace the door lock assembly.

    2. Measure the resistance of the door lock position switch.

      Standard resistance
      Tester Connection Switch Condition Specified Condition
      7 (S) - 8 (E) Lock 10 kΩ or higher
      7 (S) - 8 (E) Unlock Below 1 Ω

      • If the result is not as specified, replace the door lock assembly.