Click here

WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Entry and Start System) DATA LIST / ACTIVE TEST

Click here
Click here Click here
Click here

  1. READ DATA LIST

    Tip:

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note:

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Data List.

    5. According to the display on the intelligent tester, read the Data List.

      Table 1. Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      RR Door Courtesy SW*1 Rear RH side door courtesy light switch signal / ON or OFF

      ON: Rear RH side door open

      OFF: Rear RH side door closed

      		 -
      RL Door Courtesy SW*1 Rear LH side door courtesy light switch signal / ON or OFF

      ON: Rear LH side door open

      OFF: Rear LH side door closed

      		 -
      Back Door Courtesy SW Back door courtesy light switch signal / ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      Back Door Lock Pos SW Back door lock position switch status / ON or OFF

      ON: Back door unlocked

      OFF: Back door locked

      		 -
      Glass Hatch Courtesy Switch*2 Glass hatch courtesy switch signal / ON or OFF

      ON: Glass hatch open

      OFF: Glass hatch closed

      		 -
      FR Door Lock Pos Front RH side door lock position switch signal / UNLOCK or LOCK

      UNLOCK: Front RH side door unlocked

      LOCK: Front RH side door locked

      		 -
      FR Door Courtesy Front RH side door courtesy light switch signal / ON or OFF

      ON: Front RH side door closed

      OFF: Front RH side door open

      		 -
      FL Door Lock Pos Front LH side door lock position switch signal / UNLOCK or LOCK

      UNLOCK: Front LH side door unlocked

      LOCK: Front LH side door locked

      		 -
      FL Door Courtesy Front LH side door courtesy light switch signal / ON or OFF

      ON: Front LH side door closed

      OFF: Front LH side door open

      		 -
      RR-Door Lock Pos SW*1 Rear RH side door lock position switch signal / ON or OFF

      ON: Rear RH side door unlocked

      OFF: Rear RH side door locked

      		 -
      RL-Door Lock Pos SW*1 Rear LH side door lock position switch signal / ON or OFF

      ON: Rear LH side door unlocked

      OFF: Rear LH side door locked

      		 -

      • *1: for 5 Door

      • *2: w/ Glass Hatch Opener System

  2. ACTIVE TEST

    Tip:

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Active Test.

    5. According to the display on the intelligent tester, perform the Active Test.

      Table 2. Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Hazard Turn signal flasher relay ON/OFF -
      Wireless Buzzer Wireless door lock buzzer ON/OFF -
      Door Lock Door lock motor LOCK/UNLOCK -