UNLOCK WARNING SWITCH REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE LOWER STEERING COLUMN COVER


    1. A01DUNG

      Turn the steering wheel to the left as necessary to remove the screw.

    2. A01DNVB

      Turn the steering wheel to the right as necessary to remove the screw.

    3. A01DOHO

      for Power Tilt and Power Telescopic:


      1. Remove the screw.

    4. A01DPCB

      Detach the 2 claws and remove the lower steering column cover.

  2. REMOVE UPPER STEERING COLUMN COVER


    1. A01DR34

      Detach the 4 clips and claw to remove the upper steering column cover.

  3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01DPN3

      w/ Rain Sensor:

      Disconnect the connector.

    2. A01DODC

      w/o Rain Sensor:

      Disconnect the 2 connectors.

    3. Detach the claw and remove the windshield wiper switch assembly.

  4. REMOVE UNLOCK WARNING SWITCH ASSEMBLY


    1. A01DO7C

      Disconnect the unlock warning switch connector.

    2. Detach the 3 claws and remove the cover.

    3. A01DS5EE01
      Text in Illustration
      *1 Pin Cap
      A01DQPB Slide

      Remove the pin cap.

    4. Remove the unlock warning switch.