DOOR CONTROL TRANSMITTER (w/o Entry and Start System) REMOVAL

Note

Take extra care when handling these precision electronic components.


  1. REMOVE TRANSMITTER HOUSING COVER (except Separate Type)

    Note

    Take extra care when handling these precision electronic components.


    1. A01DPQFE01
      Text in Illustration
      *1 Protective Tape

      Twist a screwdriver in the direction of the arrow in the illustration, and open the transmitter housing cover.

      Note

      Do not forcibly pry open the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE DOOR CONTROL TRANSMITTER MODULE (except Separate Type)


    1. A01DOJYE01
      Text in Illustration
      *1 Protective Tape

      Using a precision screwdriver, remove the door control transmitter module.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE TRANSMITTER BATTERY (except Separate Type)

    Note

    When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.


    1. A01DN0J

      Twist a coin in the direction of the arrow in the illustration and remove the transmitter battery cover.

    2. A01DPLT

      Remove the battery (lithium battery: CR2016).

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the battery. The terminals may become damaged.

      • Do not touch the battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. It may cease to work.

  4. REMOVE TRANSMITTER BATTERY (for Separate Type)

    Note

    When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.


    1. A01DOCN

      Twist a coin in the direction of the arrow in the illustration and remove the transmitter housing cover.

    2. A01DS2T

      Remove the battery (lithium battery: CR2032).

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the battery. The terminals may be damaged.

      • Do not touch the battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.