FRONT DOOR LOCK INSPECTION


  1. INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/o Double Locking System)

    A01DTB7E11
    Text in Illustration
    *a Lock *b Unlock
    *c

    Component without harness connected

    (Front Door Lock Assembly LH)

    - -

    1. Check the door lock motor operation.


      1. Apply battery voltage to the motor connector and check the operation of the front door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 4 (L)

        Battery negative (-) → 1 (UL)

        Lock

        Battery positive (+) → 1 (UL)

        Battery negative (-) → 4 (L)

        Unlock

        • If the result is not as specified, replace the front door lock assembly.

    2. Check the detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        8 (LSSR) - 7 (E) Lock 10 kΩ or higher
        8 (LSSR) - 7 (E) Unlock Below 1 Ω

        • If the result is not as specified, replace the front door lock assembly.

    3. for LHD:

      A01DTP1E15
      Text in Illustration
      *a Lock *b Off
      *c Unlock *d

      Component without harness connected

      (Front Door Lock Assembly LH)


      1. Check the door lock and unlock switch.


        1. Measure the resistance according to the value(s) in the table below.

          Standard Resistance
          Tester Connection Switch Condition Specified Condition
          9 (L) - 7 (E) Lock Below 1 Ω

          9 (L) - 7 (E)

          10 (UL) - 7 (E)

          OFF 10 kΩ or higher
          10 (UL) - 7 (E) Unlock Below 1 Ω

        • If the result is not as specified, replace the front door lock assembly.

  2. INSPECT FRONT DOOR LOCK ASSEMBLY LH (w/ Double Locking System)

    A01DSK9E14
    Text in Illustration
    *a Lock *b Unlock
    *c

    Component without harness connected

    (Front Door Lock Assembly LH)

    - -

    1. Check the door lock motor operation.


      1. Apply battery voltage to the motor connector and check the operation of the door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 4 (L)

        Battery negative (-) → 3 (UL)

        Lock

        Battery positive (+) → 3 (UL)

        Battery negative (-) → 4 (L)

        Unlock

        Battery positive (+) → 2 (DL)

        Battery negative (-) → 1 (UNDL)

        Set

        Battery positive (+) → 1 (UNDL)

        Battery negative (-) → 2 (DL)

        Unset

        • If the result is not as specified, replace the front door lock assembly.

    2. Check the detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        8 (LSSR) - 7 (E) Lock 10 kΩ or higher
        8 (LSSR) - 7 (E) Unlock Below 1 Ω

        • If the result is not as specified, replace the front door lock assembly.

    3. for LHD:

      A01DUUNE03
      Text in Illustration
      *a Lock *b Unlock
      *c

      Component without harness connected

      (Front Door Lock Assembly LH)

      - -

      1. Check the door lock and unlock switch.


        1. Measure the resistance according to the value(s) in the table below.

          Standard Resistance
          Tester Connection Switch Condition Specified Condition
          9 (L) - 7 (E) Lock Below 1 Ω

          9 (L) - 7 (E)

          10 (UL) - 7 (E)

          OFF 10 kΩ or higher
          10 (UL) - 7 (E) Unlock Below 1 Ω

        • If the result is not as specified, replace the front door lock assembly.

  3. INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/o Double Locking System)

    A01DU0ME11
    Text in Illustration
    *a Unlock *b Lock
    *c

    Component without harness connected

    (Front Door Lock Assembly RH)

    - -

    1. Check the door lock motor operation.


      1. Apply battery voltage to the door lock motor connector and check the operation of the door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 4 (L)

        Battery negative (-) → 1 (UL)

        Lock

        Battery positive (+) → 1 (UL)

        Battery negative (-) → 4 (L)

        Unlock

        • If the result is not as specified, replace the front door lock assembly.

    2. Check the detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        7 (LSSR) - 8 (E) Lock 10 kΩ or higher
        7 (LSSR) - 8 (E) Unlock Below 1 Ω

        • If the result is not as specified, replace the front door lock assembly.

    3. for RHD:

      A01DMW9E08
      Text in Illustration
      *a Unlock *b Lock
      *c

      Component without harness connected

      (Front Door Lock Assembly RH)

      - -

      1. Check the door lock and unlock switch.


        1. Measure the resistance according to the value(s) in the table below.

          Standard Resistance
          Tester Connection Switch Condition Specified Condition
          6 (L) - 8 (E) Lock Below 1 Ω

          6 (L) - 8 (E)

          5 (UL) - 8 (E)

          OFF 10 kΩ or higher
          5 (UL) - 8 (E) Unlock Below 1 Ω

        • If the result is not as specified, replace the front door lock assembly.

  4. INSPECT FRONT DOOR LOCK ASSEMBLY RH (w/ Double Locking System)

    A01DOL5E12
    Text in Illustration
    *a Unlock *b Lock
    *c

    Component without harness connected

    (Front Door Lock Assembly RH)

    - -

    1. Check the door lock motor operation.


      1. Apply battery voltage to the door lock motor connector and check the operation of the door lock motor.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 2 (L)

        Battery negative (-) → 1 (UL)

        Lock

        Battery positive (+) → 1 (UL)

        Battery negative (-) → 2 (L)

        Unlock

        Battery positive (+) → 4 (DL)

        Battery negative (-) → 3 (UNDL)

        Set

        Battery positive (+) → 3 (UNDL)

        Battery negative (-) → 4 (DL)

        Unset

        • If the result is not as specified, replace the front door lock assembly.

    2. Check the detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        7 (LSSR) - 8 (E) Lock 10 kΩ or higher
        7 (LSSR) - 8 (E) Unlock Below 1 Ω

        • If the result is not as specified, replace the front door lock assembly.

    3. for RHD:

      A01DN46E05
      Text in Illustration
      *a Unlock *b Lock
      *c

      Component without harness connected

      (Front Door Lock Assembly RH)

      - -

      1. Check the door lock and unlock switch.


        1. Measure the resistance according to the value(s) in the table below.

          Standard Resistance
          Tester Connection Switch Condition Specified Condition
          6 (L) - 8 (E) Lock Below 1 Ω

          6 (L) - 8 (E)

          5 (UL) - 8 (E)

          OFF 10 kΩ or higher
          5 (UL) - 8 (E) Unlock Below 1 Ω

        • If the result is not as specified, replace the front door lock assembly.