POWER DOOR LOCK CONTROL SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / (desired system) / Data List.

    5. According to the display on the intelligent tester, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      RR Door Courtesy SW* Rear door courtesy light switch RH signal / ON or OFF

      ON: Rear door RH open

      OFF: Rear door RH closed

      		 -
      RL Door Courtesy SW* Rear door courtesy light switch LH signal / ON or OFF

      ON: Rear door LH open

      OFF: Rear door LH closed

      		 -
      Back Door Courtesy SW Back door courtesy switch signal / ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      Back Door Lock Pos SW Back door lock position switch signal / ON or OFF

      ON: Back door unlocked

      OFF: Back door locked

      		 -
      Door Key SW-Lock Driver side door key-linked switch lock signal / ON or OFF

      ON: Driver side door key cylinder turned to lock position

      OFF: Driver side door key cylinder not turned to lock position

      		 -
      D Door Key SW-UL Driver side door key-linked switch unlock signal / ON or OFF

      ON: Driver side door key cylinder turned to unlock position

      OFF: Driver side door key cylinder not turned to unlock position

      		 -
      FR Door Lock Pos Front door lock position switch RH signal / LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy Front door courtesy light switch RH signal / ON or OFF

      ON: Front door RH closed

      OFF: Front door RH open

      		 -
      FL Door Lock Pos Front door lock position switch LH signal / LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      		 -
      FL Door Courtesy Front door courtesy light switch LH signal / ON or OFF

      ON: Front door LH closed

      OFF: Front door LH open

      		 -
      RR-Door Lock Pos SW* Rear door lock position switch RH signal / ON or OFF

      ON: Rear door RH unlocked

      OFF: Rear door RH locked

      		 -
      RL-Door Lock Pos SW* Rear door lock position switch LH signal / ON or OFF

      ON: Rear door LH unlocked

      OFF: Rear door LH locked

      		 -
      The Number of DTC Number of trouble codes / Min.: 0, Max.: 255 Number of DTCs stored -

      • *: for 5 Door

      Master Switch
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Door Lock Switch Status Driver side door control switch lock signal / ON or OFF

      ON: Lock side of driver side door control switch pushed

      OFF: Lock side of driver side door control switch not pushed

      		 -
      Door Unlock Switch Status Driver side door control switch unlock signal / ON or OFF

      ON: Unlock side of driver side door control switch pushed

      OFF: Unlock side of driver side door control switch not pushed

      		 -

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Active Test.

    5. According to the display on the intelligent tester, perform the Active Test.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Door Lock Operate door lock motor Unlock/Lock/OFF -
      D-Door Unlock Operate driver side door lock motor ON/OFF -