TELEVISION DISPLAY INSTALLATION


  1. INSTALL TELEVISION DISPLAY ASSEMBLY


    1. A01DSFB

      Attach the television display assembly to the 2 guides on the front side of the bracket by moving it in the direction of the arrow in the illustration, and then attach 2 new clips to temporarily install the television display assembly.

    2. A01DQQKE01

      Install the television display assembly with the 4 bolts in the order shown in the illustration.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }
    3. Connect the connector.

  2. INSTALL TELEVISION BASE


    1. Attach the 7 claws and 4 clips to install the television base.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.