INSTRUMENT PANEL SPEAKER INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL FRONT NO. 4 SPEAKER ASSEMBLY


    1. Connect the connector.

    2. Install the front No. 4 speaker assembly with the 2 screws.

      Note


      • Do not touch the cone of the speaker.

      • When installing the speaker to the instrument panel, be careful that the wires do not get caught between parts.

  2. INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL


    1. Attach the 8 clips and 2 guides to install the upper instrument cluster finish panel.

  3. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)

    Click here

  4. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY


    1. Connect the connector.

    2. Install the front No. 2 speaker assembly with the 2 screws.

      Note


      • Do not touch the cone of the speaker.

      • When installing the speaker to the instrument panel, be careful that the wires do not get caught between parts.

  5. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


    1. Attach the 2 clips, claw and 2 guides to install the No. 1 instrument panel speaker panel.

  6. INSTALL FRONT PILLAR GARNISH LH


    1. Attach the 3 guides to install the front pillar garnish.

  7. INSTALL NO. 1 ASSIST GRIP

    Tech Tips

    Use the same procedure for the other No. 1 assist grip.


    1. Attach the 2 claws to install the No. 1 assist grip.

    2. Install the 2 bolts.

  8. INSTALL FRONT NO. 1 ASSIST GRIP PLUG LH

    Tech Tips

    Use the same procedure for the other front No. 1 assist grip plug.


    1. Attach the 2 claws to install the front No. 1 assist grip plug.

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.