STEREO JACK ADAPTER ASSEMBLY INSTALLATION


  1. INSTALL HEADPHONE TERMINAL


    1. A01DQ1P

      Attach the 4 claws to install the 2 headphone terminals.

    2. Attach the 2 clamps and connect the 2 connectors.

  2. INSTALL VIDEO (VIDEO ADAPTER) TERMINAL


    1. A01DM4L

      Attach the 4 claws to install the video terminal.

    2. Attach the clamp and connect the connector.

  3. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. Attach the 4 clips and 4 claws to install the rear console end panel.

  4. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY (for Automatic Transmission)


    1. Attach the 2 claws to install the stereo jack adapter.

  5. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY (for Manual Transmission)


    1. Attach the 2 claws to install the stereo jack adapter.

  6. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)


    1. Connect each connector.

    2. Attach the 8 clips and 2 claws to install the console panel.

  7. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)


    1. Connect each connector.

    2. Attach the 8 clips and 2 claws to install the console panel.

  8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    A01DMRGE01
    Text in Illustration
    *1 Shifting Hole Cover

    1. Install the shift lever knob and twist it in the direction indicated by the arrow.

    2. Install the shifting hole cover to the shift lever knob.

  9. INSTALL FRONT CONSOLE UPPER PANEL GARNISH


    1. w/o Seat Heater System:


      1. Connect the connector.

      2. Attach the 5 clips to install the front console upper panel garnish.

    2. w/o CRAWL:


      1. Connect each connector.

      2. Attach the 5 clips to install the front console upper panel garnish.

    3. w/ CRAWL:


      1. Attach the 5 clips to install the front console upper panel garnish.

  10. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the 4 clips to install the instrument panel finish panel end LH.

  11. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


    1. Attach the 4 clips to install the instrument panel finish panel end RH.

  12. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


    1. Attach the 5 clips to install the No. 2 instrument panel finish panel cushion.

  13. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Tech Tips

    Use the same procedure described for the No. 2 instrument panel finish panel cushion.

  14. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. Connect the connector.

    2. Attach the 4 clips to install the integration control and panel assembly.

  15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.