LUGGAGE SPEAKER (for 3 Door) INSPECTION


  1. INSPECT REAR HEADER SPEAKER ASSEMBLY


    1. A01DN3BE16
      Text in Illustration
      *a

      Component without harness connected

      (Rear Header Speaker Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 4 Ω

      If the result is not as specified, replace the rear header speaker assembly.

  2. INSPECT NO. 1 SPEAKER ASSEMBLY WITH BOX


    1. A01DOC9E64
      Text in Illustration
      *a

      Component without harness connected

      (No. 1 Speaker Assembly with Box)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 (WF1+) - 4 (WF1-) Always 2 Ω

      If the result is not as specified, replace the No. 1 speaker assembly with box.