INSPECTION PROCEDURE
PROCEDURE
CLEAN INFRARED RAY EMITTING PORTION
Clean the infrared ray emitting portion.
Clean the infrared ray emitting portion on the rear display.
Check whether the same malfunction occurs.
| OK |
|---|
| The function returns to normal. |
| NG |
|
CHECK TELEVISION SWITCH AND VOLUME ASSEMBLY (DRY-CELL BATTERY) Click here |
| OK |
|
END
CHECK TELEVISION SWITCH AND VOLUME ASSEMBLY (DRY-CELL BATTERY)
Check that the dry-cell battery of the television switch and volume assembly is not depleted.
| OK |
|---|
| Battery is not depleted. |
| NG |
|
REPLACE TELEVISION SWITCH AND VOLUME ASSEMBLY (DRY-CELL BATTERY) |
| OK |
|
CHECK TELEVISION SWITCH AND VOLUME ASSEMBLY
Temporarily replace the television switch and volume assembly with a new or known good one.
Check that the television display assembly can be operated using the television switch and volume assembly.
| OK |
|---|
| The television display assembly can be operated. |
| NG |
|
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here |
| OK |
|
END (TELEVISION SWITCH AND VOLUME ASSEMBLY WAS DEFECTIVE)