RADIO RECEIVER (for Radio Receiver Type) REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A01DQRN

      Detach the 4 clips.

    2. Disconnect the connector and remove the integration control and panel assembly.

  2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. A01DPMX

      Detach the 10 clips and remove the center instrument cluster finish panel assembly.

  3. REMOVE RADIO RECEIVER ASSEMBLY


    1. A01DQWH

      Remove the 4 bolts.

    2. Pull the radio receiver assembly to detach the 2 guides on the backside of the radio receiver assembly.

    3. Disconnect each connector and remove the radio receiver assembly.

  4. REMOVE NO. 1 RADIO BRACKET


    1. A01DPO8

      Remove the 3 screws and No. 1 radio bracket.

  5. REMOVE NO. 2 RADIO BRACKET


    1. A01DP9A

      Remove the 3 screws and No. 2 radio bracket.