AUDIO AND VISUAL SYSTEM (for Radio and Display Type) Speaker Circuit

DESCRIPTION


The sound signals amplified by the radio and display receiver assembly*1 or stereo component amplifier assembly*2 are sent to the speakers from the radio and display receiver assembly*1 or stereo component amplifier assembly*2 via the speaker circuit.

If there is a short in a speaker circuit, the radio and display receiver assembly*1 or stereo component amplifier assembly*2 detects it and stops output to the speakers.

Thus sound cannot be heard from the speakers even if there is not a malfunction in the radio and display receiver assembly*1 or stereo component amplifier assembly*2 or speakers.

WIRING DIAGRAM

A01DPNCE02
A01DU2PE07

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK VEHICLE CONDITION (SPEAKER TYPE)


    1. Check the vehicle condition.

      Result
      Result Proceed to
      for 6 Speakers A
      for 9 Speakers B

    B
    A
  2. CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)


    • *1: for RH Side

    • *2: for LH Side


    1. Disconnect the H48 and H49 radio and display receiver assembly connectors.

    2. Disconnect the J4*1 and/or K3*2 front No. 1 speaker assembly connector.

    3. Disconnect the H34*1 and/or H35*2 front No. 2 speaker assembly connector.

    4. for 3 Door:

      Disconnect the Q32*1 and/or R37*2 rear speaker set connector.

    5. for 5 Door:

      Disconnect the L1*1 and/or M1*2 rear speaker set connector.

      Standard Resistance
      for 3 Door (RH Side)
      Tester Connection Condition Specified Condition
      H49-1 (FR+) - H34-3 (TWR+) Always Below 1 Ω
      H49-5 (FR-) - H34-1 (TWR-) Always Below 1 Ω
      H34-4 (+) - J4-1 Always Below 1 Ω
      H34-2 (-) - J4-2 Always Below 1 Ω
      H48-1 (RR+) - Q32-1 Always Below 1 Ω
      H48-3 (RR-) - Q32-2 Always Below 1 Ω
      H49-1 (FR+) - Body ground Always 10 kΩ or higher
      H49-5 (FR-) - Body ground Always 10 kΩ or higher
      H34-4 (+) - Body ground Always 10 kΩ or higher
      H34-2 (-) - Body ground Always 10 kΩ or higher
      H48-1 (RR+) - Body ground Always 10 kΩ or higher
      H48-3 (RR-) - Body ground Always 10 kΩ or higher
      for 3 Door (LH Side)
      Tester Connection Condition Specified Condition
      H49-2 (FL+) - H35-3 (TWL+) Always Below 1 Ω
      H49-6 (FL-) - H35-1 (TWL-) Always Below 1 Ω
      H35-4 (+) - K3-1 Always Below 1 Ω
      H35-2 (-) - K3-2 Always Below 1 Ω
      H48-2 (RL+) - R37-1 Always Below 1 Ω
      H48-6 (RL-) - R37-2 Always Below 1 Ω
      H49-2 (FL+) - Body ground Always 10 kΩ or higher
      H49-6 (FL-) - Body ground Always 10 kΩ or higher
      H35-4 (+) - Body ground*2 Always 10 kΩ or higher
      H35-2 (-) - Body ground*2 Always 10 kΩ or higher
      H48-2 (RL+) - Body ground Always 10 kΩ or higher
      H48-6 (RL-) - Body ground Always 10 kΩ or higher
      for 5 Door (RH Side)
      Tester Connection Condition Specified Condition
      H49-1 (FR+) - H34-3 (TWR+) Always Below 1 Ω
      H49-5 (FR-) - H34-1 (TWR-) Always Below 1 Ω
      H34-4 (+) - J4-1 Always Below 1 Ω
      H34-2 (-) - J4-2 Always Below 1 Ω
      H48-1 (RR+) - L1-1 Always Below 1 Ω
      H48-3 (RR-) - L1-2 Always Below 1 Ω
      H49-1 (FR+) - Body ground Always 10 kΩ or higher
      H49-5 (FR-) - Body ground Always 10 kΩ or higher
      H34-4 (+) - Body ground Always 10 kΩ or higher
      H34-2 (-) - Body ground Always 10 kΩ or higher
      H48-1 (RR+) - Body ground Always 10 kΩ or higher
      H48-3 (RR-) - Body ground Always 10 kΩ or higher
      for 5 Door (LH Side)
      Tester Connection Condition Specified Condition
      H49-2 (FL+) - H35-3 (TWL+) Always Below 1 Ω
      H49-6 (FL-) - H35-1 (TWL-) Always Below 1 Ω
      H35-4 (+) - K3-1 Always Below 1 Ω
      H35-2 (-) - K3-2 Always Below 1 Ω
      H48-2 (RL+) - M1-1 Always Below 1 Ω
      H48-6 (RL-) - M1-2 Always Below 1 Ω
      H49-2 (FL+) - Body ground Always 10 kΩ or higher
      H49-6 (FL-) - Body ground Always 10 kΩ or higher
      H35-4 (+) - Body ground*2 Always 10 kΩ or higher
      H35-2 (-) - Body ground*2 Always 10 kΩ or higher
      H48-2 (RL+) - Body ground Always 10 kΩ or higher
      H48-6 (RL-) - Body ground Always 10 kΩ or higher

    NG
    OK
  3. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY


    1. Remove the front No. 1 speaker assembly Click here.

    2. Inspect the front No. 1 speaker assembly Click here.


    NG
    OK
  4. CHECK FRONT NO. 2 SPEAKER ASSEMBLY


    1. Replace the front No. 2 speaker with a known good one Click here.

    2. Check that the malfunction disappears.

      Tech Tips


      • Connect all the connectors that were disconnected from the front No. 2 speaker assemblies.

      • When there is a possibility that either the right or left front speaker is defective, inspect by interchanging the right one with the left one.

      • Perform the above inspection on both LH and RH sides.

      OK
      Malfunction disappears.

    NG
    OK
  5. INSPECT REAR SPEAKER SET


    1. Remove the rear speaker set.


    2. Inspect the rear speaker set.


      Result
      Result Proceed to
      OK A
      NG (for 3 Door) B
      NG (for 5 Door) C

    B
    C
    A
  6. CHECK HARNESS AND CONNECTOR (SPEAKER CIRCUIT)


    • *1: for RH Side

    • *2: for LH Side


    1. Disconnect the H67 stereo component amplifier assembly connector.

    2. Disconnect the J4*1 and/or K3*2 front No. 1 speaker assembly connector.

    3. Disconnect the H10*1 and/or H13*2 front No. 2 speaker assembly connector.

    4. Disconnect the H21*1 and/or H22*2 front No. 3 speaker assembly connector.

    5. Disconnect the H14 front No. 4 speaker assembly connector.

    6. for 3 Door:

      Disconnect the Q32*1 and/or R37*2 rear speaker set connector.

    7. for 5 Door:

      Disconnect the L1*1 and/or M1*2 rear speaker set connector.

      Standard Resistance
      for Front No. 4 Speaker Assembly
      Tester Connection Condition Specified Condition
      H67-7 (CTR+) - H14-2 Always Below 1 Ω
      H67-22 (CTR-) - H14-1 Always Below 1 Ω
      H67-7 (CTR+) - Body ground Always 10 kΩ or higher
      H67-22 (CTR-) - Body ground Always 10 kΩ or higher
      for 3 Door (RH Side)
      Tester Connection Condition Specified Condition
      H67-5 (WFR+) - J4-1 Always Below 1 Ω
      H67-20 (WFR-) - J4-2 Always Below 1 Ω
      H67-13 (FR+) - H21-1 (TWR+) Always Below 1 Ω
      H67-28 (FR-) - H21-2 (TWR-) Always Below 1 Ω
      H21-3 (+) - H10-2 Always Below 1 Ω
      H21-4 (-) - H10-1 Always Below 1 Ω
      H67-15 (RR+) - Q32-1 Always Below 1 Ω
      H67-30 (RR-) - Q32-2 Always Below 1 Ω
      H67-5 (WFR+) - Body ground Always 10 kΩ or higher
      H67-20 (WFR-) - Body ground Always 10 kΩ or higher
      H67-13 (FR+) - Body ground Always 10 kΩ or higher
      H67-28 (FR-) - Body ground Always 10 kΩ or higher
      H21-3 (+) - Body ground Always 10 kΩ or higher
      H21-4 (-) - Body ground Always 10 kΩ or higher
      H67-15 (RR+) - Body ground Always 10 kΩ or higher
      H67-30 (RR-) - Body ground Always 10 kΩ or higher
      for 3 Door (LH Side)
      Tester Connection Condition Specified Condition
      H67-4 (WFL+) - K3-1 Always Below 1 Ω
      H67-19 (WFL-) - K3-2 Always Below 1 Ω
      H67-12 (FL+) - H22-1 (TWL+) Always Below 1 Ω
      H67-27 (FL-) - H22-2 (TWL-) Always Below 1 Ω
      H22-3 (+) - H13-2 Always Below 1 Ω
      H22-4 (-) - H13-1 Always Below 1 Ω
      H67-14 (RL+) - R37-1 Always Below 1 Ω
      H67-29 (RL-) - R37-2 Always Below 1 Ω
      H67-4 (WFL+) - Body ground Always 10 kΩ or higher
      H67-19 (WFL-) - Body ground Always 10 kΩ or higher
      H67-12 (FL+) - Body ground Always 10 kΩ or higher
      H67-27 (FL-) - Body ground Always 10 kΩ or higher
      H22-3 (+) - Body ground Always 10 kΩ or higher
      H22-4 (-) - Body ground Always 10 kΩ or higher
      H67-14 (RL+) - Body ground Always 10 kΩ or higher
      H67-29 (RL-) - Body ground Always 10 kΩ or higher
      for 5 Door (RH Side)
      Tester Connection Condition Specified Condition
      H67-5 (WFR+) - J4-1 Always Below 1 Ω
      H67-20 (WFR-) - J4-2 Always Below 1 Ω
      H67-13 (FR+) - H21-1 (TWR+) Always Below 1 Ω
      H67-28 (FR-) - H21-2 (TWR-) Always Below 1 Ω
      H21-3 (+) - H10-2 Always Below 1 Ω
      H21-4 (-) - H10-1 Always Below 1 Ω
      H67-15 (RR+) - L1-1 Always Below 1 Ω
      H67-30 (RR-) - L1-2 Always Below 1 Ω
      H67-5 (WFR+) - Body ground Always 10 kΩ or higher
      H67-20 (WFR-) - Body ground Always 10 kΩ or higher
      H67-13 (FR+) - Body ground Always 10 kΩ or higher
      H67-28 (FR-) - Body ground Always 10 kΩ or higher
      H21-3 (+) - Body ground Always 10 kΩ or higher
      H21-4 (-) - Body ground Always 10 kΩ or higher
      H67-15 (RR+) - Body ground Always 10 kΩ or higher
      H67-30 (RR-) - Body ground Always 10 kΩ or higher
      for 5 Door (LH Side)
      Tester Connection Condition Specified Condition
      H67-4 (WFL+) - K3-1 Always Below 1 Ω
      H67-19 (WFL-) - K3-2 Always Below 1 Ω
      H67-12 (FL+) - H22-1 (TWL+) Always Below 1 Ω
      H67-27 (FL-) - H22-2 (TWL-) Always Below 1 Ω
      H22-3 (+) - H13-2 Always Below 1 Ω
      H22-4 (-) - H13-1 Always Below 1 Ω
      H67-14 (RL+) - M1-1 Always Below 1 Ω
      H67-29 (RL-) - M1-2 Always Below 1 Ω
      H67-4 (WFL+) - Body ground Always 10 kΩ or higher
      H67-19 (WFL-) - Body ground Always 10 kΩ or higher
      H67-12 (FL+) - Body ground Always 10 kΩ or higher
      H67-27 (FL-) - Body ground Always 10 kΩ or higher
      H22-3 (+) - Body ground Always 10 kΩ or higher
      H22-4 (-) - Body ground Always 10 kΩ or higher
      H67-14 (RL+) - Body ground Always 10 kΩ or higher
      H67-29 (RL-) - Body ground Always 10 kΩ or higher

    NG
    OK
  7. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY


    1. Remove the front No. 1 speaker assembly Click here.

    2. Inspect the front No. 1 speaker assembly Click here.


    NG
    OK
  8. CHECK FRONT NO. 2 SPEAKER ASSEMBLY


    1. Replace the front No. 2 speaker with a known good one Click here.

    2. Check that the malfunction disappears.

      Tech Tips


      • Connect all the connectors that were disconnected from the front No. 2 speaker assemblies.

      • When there is a possibility that either the right or left front speaker is defective, inspect by interchanging the right one with the left one.

      • Perform the above inspection on both LH and RH sides.

      OK
      Malfunction disappears.

    NG
    OK
  9. CHECK FRONT NO. 4 SPEAKER ASSEMBLY


    1. Replace the front No. 4 speaker with a known good one Click here.

    2. Check that the malfunction disappears.

      Tech Tips

      Connect all the connectors that were disconnected from the front No. 4 speaker assemblies.

      OK
      Malfunction disappears.

    NG
    OK
  10. CHECK FRONT NO. 3 SPEAKER ASSEMBLY


    1. Replace the front No. 3 speaker with a known good one Click here.

    2. Check that the malfunction disappears.

      Tech Tips


      • Connect all the connectors that were disconnected from the front No. 3 speaker assemblies.

      • When there is a possibility that either the right or left front speaker is defective, inspect by interchanging the right one with the left one.

      • Perform the above inspection on both LH and RH sides.

      OK
      Malfunction disappears.

    NG
    OK
  11. INSPECT REAR SPEAKER SET


    1. Remove the rear speaker set.


    2. Inspect the rear speaker set.


      Result
      Result Proceed to
      OK A
      NG (for 3 Door) B
      NG (for 5 Door) C

    B
    C
    A