Click here

MULTIPLEX TILT AND TELESCOPIC ECU INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL MULTIPLEX TILT AND TELESCOPIC ECU


    1. Install the ECU with the bolt.

      2.8 N*m 28 kgf*cm 24 in.*lbf

    2. Connect the 2 connectors.

      Note:

      The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.

    3. Attach the wire harness clamp.

  2. Click here

    INSTALL NO. 1 INSTRUMENT LOWER PANEL AIRBAG ASSEMBLY

    (Click here)

  3. Click here

    CHECK SRS WARNING LIGHT

    (Click here)