Click here

HEATED STEERING WHEEL CONTROLLER INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY


    1. Install the steering wheel heater control assembly with the 2 screws.

    2. Connect the 2 connectors and connector clamp.

  2. Click here

    INSTALL STEERING PAD ASSEMBLY


    1. A01DU2W

      Support the steering pad with one hand.

    2. Connect the 2 connectors to the steering pad.

      Note:

      When handling the airbag connector, take care not to damage the airbag wire harness.

    3. Connect the horn connector.

    4. Confirm that the groove along the circumference of the "TORX" screw is attached to the screw case and place the steering pad onto the steering wheel.

    5. Using a T30 "TORX" socket wrench, tighten the 2 screws.

      8.8 N*m 90 kgf*cm 78 in.*lbf
  3. Click here

    INSTALL NO. 2 STEERING WHEEL LOWER COVER


    1. A01DT5GE01

      Attach the 2 claws to install the cover.

      Table 1. Text in Illustration
      *A w/o Cruise Control System
      *B w/ Cruise Control System
  4. Click here

    INSTALL NO. 3 STEERING WHEEL LOWER COVER


    1. Attach the 2 claws to install the cover.

  5. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  6. Click here

    CHECK SRS WARNING LIGHT

    (Click here)