Click here

PARKING BRAKE LEVER REMOVAL

Click here
Click here Click here
Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

Click here
  1. Click here

    REMOVE REAR CONSOLE BOX ASSEMBLY


    1. for Automatic Transmission:

      Remove the rear console box assembly (Click here).

    2. for Manual Transmission:

      Remove the rear console box assembly (Click here).

    3. w/ Refrigerated Cool Box:

      Remove the rear console box assembly (Click here).

    4. for Bench Seat Type:

      Remove the rear console box assembly (Click here).

  2. Click here

    REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY


    1. Release the parking brake lever.

    2. Disconnect the parking brake switch connector.

    3. A01DQP7

      Remove the adjusting nut.

    4. A01DT9U

      Disconnect the No. 2 parking brake cable and No. 3 parking brake cable from the No. 1 parking brake pull rod.

    5. Remove the No. 1 parking brake pull rod, bush and compression spring from the parking brake lever.

    6. Remove the straight pin from the parking brake lever.

    7. A01DNUW

      Remove the 4 bolts and parking brake lever.

  3. Click here

    REMOVE PARKING BRAKE SWITCH ASSEMBLY


    1. A01DMIS

      Remove the screw and parking brake switch from the parking brake lever.

    2. A01DN49

      Disconnect the connector.