Click here

VEHICLE STABILITY CONTROL SYSTEM (for Hydraulic Brake Booster), Diagnostic DTC:43

Click here
Click here Click here
DTC Code DTC Name
43 ABS Control System Malfunction
Click here

DESCRIPTION

This DTC is output when the VSC system detects a malfunction in the ABS.

DTC Code DTC Detection Condition Trouble Area
43 A malfunction in the anti-lock brake system. Anti-lock brake system
Click here

INSPECTION PROCEDURE

Note:

When replacing the master cylinder solenoid, perform calibration (Click here).

Click here

PROCEDURE


  1. Click here

    CHECK ANTI-LOCK BRAKE SYSTEM


    1. Clear the DTCs (Click here).

    2. Turn the ignition switch off.

    3. Check if an ABS DTC is output (Click here).

      Table 1. Result
      Result Proceed to
      DTC (ABS DTC) is not output A
      DTC (ABS DTC) is output B

  2. Click here

    CONFIRM DTC


    1. Clear the DTCs (Click here).

    2. Turn the ignition switch off.

    3. Check if the same DTC is output (Click here).

      Table 2. Result
      Result Proceed to
      DTC is not output A
      DTC is output (for LHD) B
      DTC is output (for RHD) C

  3. Click here

    USE SIMULATION METHOD TO CHECKClick here

  4. Click here

    REPAIR CIRCUITS INDICATED BY OUTPUT DTCSClick here

  5. Click here

    REPLACE MASTER CYLINDER SOLENOIDClick here

  6. Click here

    REPLACE MASTER CYLINDER SOLENOIDClick here