Click here

ANTI-LOCK BRAKE SYSTEM, Diagnostic DTC:C1268

Click here
Click here Click here
DTC Code DTC Name
C1268 Transfer L4 Position Switch Circuit
Click here

DESCRIPTION

DTC Code DTC Detection Condition Trouble Area
C1268 The skid control ECU receives an L4 abnormal status signal from the four wheel drive control ECU via the CAN.

  • Transfer system

  • Brake actuator assembly (Skid control ECU)
Click here

INSPECTION PROCEDURE

Note:

When replacing the brake actuator assembly, perform calibration (Click here).

Click here

PROCEDURE


  1. Click here

    INSPECT TRANSFER L4 SHIFT


    1. Shift the transfer to L4, and then drive the vehicle and check that there are no problems with the transfer system.

      OK
      There are no problems with the transfer system.

  2. Click here

    RECONFIRM DTC


    1. Clear the DTCs (Click here).

    2. Shift the transfer to L4, drive the vehicle, and then check for DTCs (Click here).

      Table 1. Result
      Result Proceed to
      DTC is output A
      DTC is not output B

  3. Click here

    REPLACE BRAKE ACTUATOR ASSEMBLYClick here

  4. Click here

    GO TO TRANSFER SYSTEM (PROBLEM SYMPTOMS TABLE)Click here

  5. Click here

    USE SIMULATION METHOD TO CHECKClick here