Click here

REAR STABILIZER BAR (w/o KDSS) INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL REAR STABILIZER BAR


    1. A01DOHRE03

      Install the 2 stabilizer bushes to the stabilizer bar.

      Tip:

      Install the stabilizer bush to the outer side of the stabilizer bush stopper on the stabilizer bar.

      Table 1. Text in Illustration
      A01DMKT Outer Side

    2. Install the stabilizer bar and 2 stabilizer brackets with the 4 bolts.

      45 N*m 459 kgf*cm 33 ft.*lbf
  2. Click here

    INSTALL REAR STABILIZER LINK ASSEMBLY LH


    1. Install the stabilizer link with a new nut.

      70 N*m 714 kgf*cm 52 ft.*lbf
      Tip:

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

    2. Install the 2 retainers and cushion to the stabilizer link.

    3. Hold the stabilizer bar link with a wrench, and then install the retainer, cushion and link with a new nut.

      15 N*m 153 kgf*cm 11 ft.*lbf
  3. Click here

    INSTALL REAR STABILIZER LINK ASSEMBLY RH

    Tip:

    Use the same procedure described for the LH side.

  4. Click here

    INSTALL REAR WHEEL

    112 N*m 1142 kgf*cm 83 ft.*lbf