FRONT LOWER SUSPENSION ARM REASSEMBLY


  1. INSTALL LOWER BALL JOINT DUST COVER LH


    1. Pack the upper arm ball joint with MP grease.

      Grease capacity
      8.0 g (0.282 oz.)
    2. A01DS29E01
      Text in Illustration
      *1 MP Grease

      Apply MP grease to the locations shown in the illustration.

      Note

      Do not apply MP grease to the tapered or threaded parts of the ball joint.

    3. Install the dust cover to the lower arm.

    4. A01DMLQ

      Using a snap ring expander, install the dust cover set ring.

      Note

      Make sure the set ring is securely installed in the groove.

  2. INSTALL FRONT NO. 2 LOWER ARM BUSH LH


    1. A01DPXKE01
      Text in Illustration
      *a Bush Positioning Protrusion

      Using SST and a press, press in a new bush.

      SST
      09387-00020
      09710-30041   ( 09710-03221 )

      Note

      Press in the bush while making sure the bush positioning protrusions are perpendicular to the lower arm as shown in the illustration.

  3. INSTALL FRONT NO. 1 LOWER ARM BUSH LH


    1. A01DOFFE01

      Using SST and a press, press in a new bush.

      SST
      09612-30012
      09710-30012   ( 09710-04081 )